Jump to content
3DCoat Forums

3D-TPI

Member
  • Posts

    33
  • Joined

  • Last visited

Everything posted by 3D-TPI

  1. nothiing happens when i try to download applinks.. tryed 3ds and maya both of them when i click the download applink lilnk.. the page refreshes and nothing is downloaded.. and right clicking the "download applink" link lets me save a "download.htm" file not the acctual zip
  2. do we uninstall 3.5x or does 3.7 install on top of 3.5x directory?
  3. SOLVED!!!! IT was the options.xml file int he 3dcoat documents folder!!! READ this solution on another thread (the 3dcoat locks up thread) and deleted the options.xml file and WOW now the 3dcoat 64 bit version runs too!!!! THANK YOU ANDREW! but why? you had me delete the ENTIRE 3dcoat documents folder before and that didnt work .. so WHY only delting the options.xml ( which wass deleted when whole folder was deleted) works?? but now we know solution to 3dcoat freezing or "disapearing" it it is to delete the options.xml What does this file hold information wise? will it affect any of my wacom or 3dcoat settings in the long run? and funny that this file did not effect the 32 bit version only the 64 bit version did not work.. weird...
  4. OMG!!!! Andrew THaNK YOU!!! i read this post DELETING this options.xml ALSO CURES MY PROBLEM form the 3dcoat x64 closing! thread: http://3d-coat.com/forum/index.php?showtopic=8625 i read this and said well i deleted the ENTIRE 3dcoat directory like you asked me to before.. but maybe ill just delet this one file and now the 64 bit 3dcoat works!!!... why would it not work by deleting the whole directory and work if only 1 file deteled?! THNK YOU!
  5. so if you go back to the last good version that worked for you ( ie 3.5.22) is it still doing it? when you installed bigger monitor did it come with drivers that you installed(some new monitors got drivers for accessories/display properties)
  6. hmm sounds like a problem i used to have with maya and matchmover.. ended up that I needed to update my graphics drivers.. ohh and matchmover would lock up the same way.. one day wen i was deleting services to see what interfeared it turned out the wacom (pen pressure tablet) service is what was causing matchmover to "freeze" .. so maybe kill your wacom drivers off via task manager(on win 7)...
  7. log attached I know you are busy.. and this may be taking too much time... I think maybe for now i will use the 32 bit build untill maybe you have time to finish 3.5.25 (or whatever you where working on before i had this problem) Log.txt
  8. yes that one did take a while to startup.. here is log.txt result Log.txt
  9. ohh and re direct x setup.. the link on the 3dcoat installer is broken: http://pilgway.com/files/dxsetup.exe i used the webdirect x installer.. but again.. stil 3dcoat opens and then closes within a second of opening it.. I cant even input my serival number(it reads "demo" on top title bar)
  10. I been usinging 3d coat on a workstation.. as i got upgrade dto a nice i7 quad laptop with nvidia 3000m graphics card.. I downloade dthe newest build of 3dcoat to use it on the laptop.. but it opens and then immediatly closes again!?! this is the same with GL or DirctX.. i downloaded the cuda.. as i have the mobile 3000 nvidia card and installed the directx and open gl drivers.. whjy would this happen>? do i need to download the 3.5.0 version fists then install the 3.5.24 beta on it. or as its a new laptop.. i need something else (older direct x drivers.. the m3000 does open gl 4.0 and dx11.. but wouldnt dx 11 have the dx9 in it..) 3dcoat opens...for litterally 1 sec and then disapears... (before it wouldnt open and asked for dx drivers to be instaleld.. but now it just opens and closes)
  11. just downloaded 3.5.9 again.. but the filename says 3.5.9C so I'm guessing there have been another updated after 3.5.9b?
  12. is this using ptex? so there ar no uvs? how does that work with maxwell as maxwell needs uvs?
  13. AHH thank you yet a new thing that got added in my 3dc absence.. so the chisel tool is a polish tool? thats how the announcment makes it seem..at first i thought it was 2 dif tools.
  14. installed build .23 after being away from 3dcoat foer a few months.. lots have been added changed! wow! BUT where is the new polish and chisel tools? cannot find them in voxel tool on left of screen..(also looked in sculpt room) and what do they do? esp polish. will that litterally like smooth the surface of any jarrry spiked w/o squishing the surface like normal smooth does?
  15. so when doing uvs in 3dc its best to have your faces be Blue? not gray? ,, if i understand Red=stretched uv/face ratio gray=close to 1:1 face/uv ratio blue=copressed uv/face ratio... but having blue faces if best? cuz it preserves texture detail?
  16. JAVIS, thanks for updating your vimeo vid manuals for uv tools for .12!
  17. is there a demo vid by anyusers showing this tool in action? ALSO concerning working with UVs.. I hav not dont this in 3dcoat and in general I am pretty weak at doing uv layouts(i dont work in game industry) but i would like to know how to/improve my abilities so is there a "zero to hero" guide anywhere on this forum on how to start off with making/working uvs in 3dc? maybe this could be a great online webinar class too
  18. Just did a quick 5min sculpt pullin voxels from the sphere in build 3.1.08 and was very happy to how fast the tools working after my problems with 3.1.07.. this isnt much dunno where im gona go with the sculpt.. hope to develop more detail.. but as a pulled voxels around it reminded me of a baby onesy (total baby cover all) so i cut out a hole for the face and put some "eyes" in there and added fingures and toes to the stubs.. EXPORTED RAW VOXEL from 3dc as obj into maya and now I use it to test new maxwel V2 sss settings and its a fun little render test model.. hoping to retopo in 3dc and learn how to do uvs in 3dc and then it can get textured and further detail sculpted. I built the sss material from "scratch" after using maxwel sss wizard i made modifications to get the shader looking like i wanted it too.. rendered to 15samples at 512 rez
  19. YEP Your RIGHT!! .08 works WAYYYY better.. tools fast! fast sculpts! THANKS ANDREW! and the pose tool seems a BIT better.. but it still ends up in a differnt place that i draw it(its offset) and smaller than i draw it .. is this normal? never really used it before... I noticed it works prety much OK if I dont apply any transform SCALE to my vox object.. but as soon as I scal my vox guy up.. the more i scale it up the more problems i get with pose tool..
  20. Thank you.. cuz right now.. v 3.1.07 is runing the "weirdest" of all the 3.1 builds on my system.. I mean tools ran slower (vox sculpting lags w some tools) and it generaly feels different.. But now that i see .08 on horizon ill wait till that comes and probably things wil be runing smooth again
  21. anyone else have problems with POSE TOOL in 3.1.07? xinxp64 cuda after i use transform (to scal vox obj up a bit) the pose tool totally appears in wrong area at wrong size then where/how i drew it.. _I posted this under BUG section too..
  22. wow.. dude andrew I have no idea how fast u work.. u must not sleep! but anyways.. wanted to give feedback on 3.1.02.. ITS AWSOME! so far all problems i had in 3.0 that were noticable.. mostly the hangups and crashes no longer happen to me! so 3.1 actsd now as stable as 3 ran.. and its better.. tools seem faster.. i was able to import hig polymesh w/o problems.. retop room worked great for me (had weirdness chukness before but all good now!!! CUDA winXP64 OpenGL (3ghz xeon 16gbRam 2x4600quadroFX 15000rpm sasDrive) and I LOVE the new muscle tool!!! so awsoem for doin things like toon hairs too!! thnk you andrew! pic of toon heads w/ muscle hairs:
  23. THANKS ANDREW!!! also thansk for fixing CARVE tool in gl cuda!! wow it works EXACTLY like I would expect it too .. if not better.. and its way FASTER to carve now too.. most VOXEL tools exept for INCREASE seem to run faster-- increase acctually runs slowly.. but will try to install nonCUDA n test since im gettign crash n hangups w v3.1 now..(posted in bug section)
  24. usually for the 3.0x updates i just overwrote the installed w the new verion.. and it workd fine.. but for the 3.1 i went ahead and uninstalled 3.0 and then installed 3.1.. but I guess it would work to just install 3.1 installer over 3.0 you will also need your serial # to reregister 3.1 when you start it up for first time (at least it asked me to)
  25. well I would say this is lower priority., and I dl the newest build today "P" and it was suggested by another user to us extrude insted.. I used extrude and it gave me the result I wanted.. so things r good for me.. and thanks for your amazing hard work.. cant believe you poped out another build!
×
×
  • Create New...