jene

人間は見てくれていないが天使はちゃんと見守ってくれている。 Humans don't look out for me, but the angel do look out for me.

まあ結局こんなもん作ったところでなんの意味もなかったんだな

Hello. I made a modeling room tutorial book. "3D-COAT POLYGON MODELING IN MODERING ROOM ~how to make a unicycle robot~ This e-book describes how to use the modeling room of the 3DCG software "3D-coat". Total 261 pages PDF. It consists of two parts: one is a practical production to make a robot on the cover and the other is a list of functions of the modeling room. This is a manual for those who want to know how to use the simple polygon modeling function in the modeling room implemented from 3d-coat 2021 to 2022. (This book was written in Japanese and machine translated into　English. Please note that some parts of the translation are unnatural.) It took 16 months to make. if you want to know about modeling room, please purchase on this URL.　Data sales site:BOOTH. https://jene.booth.pm/items/5526486 Table of contents. 4 big chapter. Practice Creation Explanation of Functions if possible, please perchase it https://jene.booth.pm/items/5526486 Thank you for reading.

Carlosan,response and check thank you. OK. I remember that result.

I test v2024.07. clipping mask and layer mask is great. but when I send the texture from 3D-coat to other software, Layer Mask does not send. (from drawing software to 3D-coat is good). I'm using CLIP STUDIO PAINT. anyway, this is a nice tool what I want. thank you very much. Дякую. layermask.mp4

the active tab moves When i move the window. It is inconvenient because it overlaps with other tabs. Is this an expected event? v2024.05 tab.mp4

OK, I will try it. response thank you. (but I want to find the best way to remain multi resolution. )

hello . this is Multi resolution and Sculpt layer problem. version is 2024.01 when I use pose tool on multi resolution and sculpt layer , symmetry is broken. low level resolution -> posing -> high resolution -> asymmetry. please watch this video. symmetry.mp4 and, when I change resolution level after I delete sculpt layer, the base mesh is broken. please watch this video. mlshape.mp4 if this problem fix , 3D-coat posing method will become excellent. anyone, do you know how to do?

a Happy new year. I downloaded 3D-coatV2024. this is my personal opinion. personal feeling. The new search icon doesn't need the left of all icon. search tool is actually convenient. it is a good thing. but it is not main tool. I think it is intuitive to move the search icon to the right. anyone, how do you think about this? this is not a bug. for your reference. щасливого Нового року. Хочу ще раз подякувати 3D-coat цього року.

hello. probably this is an issue. When symmetry is on, Pose tool of brush paint have crack. please watch this mp4. pose2.mp4 Thank you very much for your every time bug fixes.

hello, AbnRanger. yes so, first I wrote "this is my personal opinion". finally, the software system is decided by Andrew. but you're right. we are selfish. We have to think that Maybe Andrew takes user feedback too seriously. dear Mr.Andrew. 3D-coat is your software. please decide it by your feeling. please don't listen our selfish request. If I find your system easy to use, I just use 3D-coat. if I find your system difficult to use, I just use other software. I apologize for my confusing remark. I still think that 3D-coat is one of the best function in many 3D software. thank you

PS it is very useful to reset the center of rotation with F key in 3D-coat. it is great. (blender is the numeric keypad "." key. it is inconvenient.)

hello. this is my personal opinion. it is not technical request. I expect 3d-coat to learn the kindness that other 3D software has, not the special new features. For example, in 3d-coat you delete with the delete key, but in Blender I delete vertices and edges with the X key. This is a great feature. it is very kindly designed. I don't have to repeatedly go back and forth between the standard left hand position and the delete key. For example, in Blender, I can select just the area enclosed by a rectangle, but with 3d-coat, it is difficult to make a precise selection because the selection extends beyond the area enclosed by the rectangle. Or I have to press the ESC key twice because the selection I made earlier remains after using the transform function. This is another unfriendly feature, no matter how awesome the function is. Each of these is a small inconvenience, but very important. I want you to remember that tiredness, stressful and inconvenience is enemy of human. anyway, everyday thank you for your development.

excuse me, I report an issue in this topic. it is skecthfab uploading error. 404 web page error. the version is v2023.20 please watch the video. gg1.mp4

hello, Silas Merlin. for sure. at the moment, "Mark as Sharp" can also use subdivision surface. if your 3Dmodel is closed, maybe it will be good result. it is not perfect though. for example, flat 2D primitive is not applied. "Mark as sharp" , you can set the edge that you want to sharp. Mark as sharp is not perfect though. if 3D model is a plane, it need improvement or other function.

probably I found the cause. please watch the mp4 in Voxel mode, I use Surface brush and I don't change the brush to Voxel brush before baking. the error happen. if change the brush to voxel brush before baking, the error doesn't find. for your information. bakingfix.mp4

hello. it's about baking error. the version is 2022-60. the overhang point is inverted. please watch the mp4. is this a bug or my mistake? 3D-coat is one of great software. Development Thank you. aax.mp4

OK, I advice him to do those. Carlosan, response thank you.

hello. this is my friend's issue. it's about 3DcoatTextura license error ( I don't have same issue.) my friend use 3DcoatTextura. so, he buy a new PC and he downloaded 3DcoatTxtura to new PC. but he find a message when he load a license to 3DcoatTextura. First, I advised that "that message is happen when you load 3DCTextura license to 3Dcoat full version." but, He downloaded 3DcoatTextura and he used Textura license. next, I advised that "maybe, your license is expired?". but he said that his license date is JAN 25. there are 3 days left . (He is already sent a e-mail to Pilgway. but he doesn't receive a response yet . ) he is very troubled. does anyone know what the cause is ? anyone have same issue ?

Excuse me, I used "Reset to default setting". the issue is settled. Thank you.

hello. I have an issue. I can not use "camera snapping 45 degree" in V2022 after I installed v2022.49. old 2022 version too. when I push SHIFT key, it does't response. probably the preference data or the navigation preset data changed. does someone have same issue?

Thank you introduction. this is a e-book to learn how to use 3D-coat modeling room for Japanese people. 261page. the content is like this. chapter1 is making a 3Dmodel. chapter2 is explanation of all the function of modeling room. this is for Japanese language. but if you can read Japanese ,this book will give you a good experience. ご紹介ありがとうございます。この本は3d-coatのモデリングルームの使い方の解説本です。全編日本語です。 まずそもそも3d-coat自体に解説本が少ないうえ、特にモデリングルームは2021で正式実装された新しい機能なので解説がありませんでした。 なのでモデリングルームの使い方を、1体の3Dモデルを実際に製作する前半の章とモデリングルームの全機能一覧を解説した後半の章で使い方を解説しています。 スカルプトでの粘土造形だと静物や機械を作り辛いときに、簡単な無機物小物を作るのにモデリングルームが役に立ちます。 モデリングルームを学ぶことで造形の幅が広がると思います。他のポリゴンモデリングソフトが使えれば特に必要はない項目かもしれませんが、造形を3d-coatで完結できることは利点のひとつなので、ぜひ本書で学んでみてください。 low polygon modeling, texture painting, sending to sculpt room, all function explanation making of a wheel, p56 spine tool, p184 Contents

hello, probably this is a bug or old setting . the version is 2022v39 I find a message when I use Bas-Relief. "The modeling operations require a special license.You may buy it on the 3D-Coat's official site" but I am using 3D-coat 2022 full version license. and I can not find "special license" on official web site. I guess this is old generation setting. or, if there is "special license" on official web site, I want to know where that is. Mr.Andrew, all Pilgway team. Thank you for your development.

this problem seems to be fixed in 3D-coatPrint current version. I can find "auto pick". it is convenient. thank you Mr Andrew and development stuff.

間瀬様、ご苦労様です。翻訳はおおむね問題ないと思います。 実使用中に何か表示のせいなどでちぐはぐが起きている場合はここで報告します。 F9での翻訳送信ですが、もしや誰かがXMLを全体的に送信したときに競合して書き換えられてしまうかもしれないように感じているので使用を控えています。検証ができなくてすみません。 （Pilgwayのチームは当然日本語がわからず、日本語を見ても多分まるで私たちがアラビア文字を見てるようにしか感じられないはずなので、同じ個所に2種類の翻訳が競合した場合に私たちを信じて後から来た方を自動的に採用してるのではないかと体感しています。）