Search the Community
Showing results for tags 'creature'.
-
Hey guys and gals, is there any source for quality textures( preferably seamless) or smart materials for texturing creatures, monsters, etc.? Something like skin, flesh and other creepy stuff. There is quite a lot of stuff for Substance Painter in spsm format, but nothing for 3dcoat. Maybe there is a way to extract textures from spsm package or export from Substance?
- 2 replies
-
- 3dcoat
- smartmaterial
-
(and 5 more)
Tagged with:
-
Creating a monster in 3D-Coat and rendering in Corona Renderer - without UV and retopology. Part 2. Video Content: 0:01 - Intro 0:18 - InfoPartners 0:22 - Important information about turning on of subtitles. 0:29 - Information having an impact on the development of the channel and the output of the following lessons. 0:45 - Continuing to edit the proportions and details of the monster by using the different brushes. 3:03 - Use the Pose tool to correct proportions. 3:19 - Creating a mask and adding details to the base layer by using the Clay brush. 4:00 AM - Adding parts with the Draw brush. 5:25 - Using the Pose Tool to correct a pose. 8:45 - CutOff-brush to remove unwanted parts. 10:10 - I make special masks with the help of Freeze, in order not to touch the separate parts during the editing of the geometry. 10:26 - Continuing to work with the Pose and Move Tool. 10:59 - I draw additional tentacles in voxel mode with the Sphere brush. Also, again - I use Freeze and CutOff. 11:30 Paint texture in Paint-Room and export to FBX. 11:39 - Import models in 3Ds Max. 11:56 - Creating CoronaSkinMtl and configuring VertexColor. 13:43 - Lighting setup in Corona Renderer. 14:15 - The ending. 14:31 - The ending. Video preview of other lessons. A subscription button. If you like this video: ► Click on the “Thumb up” ► Subscribe to the channel to avoid missing new releases ► Share with friends - do not be greedy =) After all, they also want to get this knowledge =) Enjoy watching! Best regards, Andrew Krivulya aka Charly.
- 1 reply
-
- 1
-
- 3d coat
- corona renderer
- (and 6 more)
-
Hi 3DCoaters! I totally missed it to post this image here although a huge part of the creation process was done in 3DCoat! You can find a small making of at Blendernation: Behind the scenes: It came from below Hope you like it!
-
-
- characters
- 3dmodel
-
(and 2 more)
Tagged with:
-
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1.-
- creature
- corona render
-
(and 2 more)
Tagged with:
-
From the album: The Forester
Hello, everyone! This is WIP P11 and I finished the character. Now will start to rig him and setup the pose. All sculpt was done in 3d-Coat In the video, I show the process of adjusting the skin and hair in the new Corona Render 1.7, as well as the retopology of some objects in 3d-Soat, texturing in the Substance Painter and setting up materials in the Corona render. Show using the textures for scuffs and dirt from the site Poliigon, as well as creating chains using the script BraidedHair. Combing the hair and fur in Ornatrix. Rendered on the Forrender.com farm. ( 2*Xeon e5 2670 56Gb RAM) The noise threshold was originally set at 5%, as the developers themselves advise for Denoiser. But later I realized that I'd better render a little longer and bring the threshold to 2-3%, instead of using Denoiser. He did not like me very much. Still, the eye is pleasant more natural photo noise, rather than a smoothed picture. Especially if you put a threshold of 3-4% - the noise is almost invisible in 1:1. -
From the album: Concept art for dark fantasy movie
-
- concept design
- character art
-
(and 4 more)
Tagged with:
-
From the album: Concept art for dark fantasy movie
-
- conceptart
- characterdesign
-
(and 4 more)
Tagged with:
-
From the album: Alien Leader
Created for my Mudworld series. Head done in Zbrush but clothing is 3D coat. 3D Coat allows for a very cool way of clothing design. I'll soon publish tutorial about it on my channel - https://www.youtube.com/c/AntonTenitsky -
From the album: Mud Creatures
Sculpt practice Inspired by this photopack - https://www.fotoref.com/products/mud-pools Making of is here - -
From the album: Carlosan
Hi guys! This is my recent personal project. I hope you like it. Kitbash initial process using 3DC, additional modeling Blender, Composition in Fusion.© @carlosandreoni
- 4 comments
-
- 1
-
- fantasy
- hardsurface
-
(and 1 more)
Tagged with:
-
My 3rd speedsculpting video in 3d-Coat. This is my long W.I.P which I created in parallel work with a girl hair which you seen earlier =) I have many plans for this guy. I want use megascans to create an environment for him and many other tools to improve him =) So the new W.I.P. with a video will coming soon. And now enjoy from viewing this video. Hope you will like this guy and you will be interested in next WIP with him =) Happy viewing!
-
- creature
- 3dcoat speed sculpt
-
(and 3 more)
Tagged with:
-
My 3rd speedsculpting video in 3d-Coat. This is my long W.I.P which I created in parallel work with a girl hair which you seen earlier =) I have many plans for this guy. I want use megascans to create an environment for him and many other tools to improve him =) So the new W.I.P. with a video will coming soon. And now enjoy from viewing this video. Hope you will like this guy and you will be interested in next WIP with him =) Happy viewing!
© artofcharly
-
- 3dcoat
- speedsculpt
-
(and 2 more)
Tagged with: