Jump to content
3D Coat Forums
Sign in to follow this  

Recommended Posts

I don't know if any of you are interested in turning your 3d printed sculpts into bronzes, but that's what I have done over the
last couple of years.Actually I use a combination of clay,wax and 3d prints to create the originals, then I make a silicone
rubber mold and pour a wax copy etc. I won't go into the entire casting  process because it is rather extensive and there is
plenty of info. online if you want to learn about it. With the help of my parents, my wife and my son we built our own
casting facility through which we cast our own work.It is a resurrection of the foundry my Dad and I built years ago.If your
thinking about casting your own sculpts you may want to contact your local foundry because building your own foundry is
costly and labor intensive and not worth it if you are only going to do one offs and not sell multiple editions of the
piece.The cost of casting will vary depending on your location and the particular foundry you use.Where I live, (North
Carolina), I have been quoted anywhere from several hundred for a small uncomplicated piece to several thousand for a
more complex piece.It's not cheap but it may be worth it if you value your art and want to preserve it forever.
 Casting my own work has saved me thousands but like I said it's not for everyone.

Some of you may remember some of these compositions I created in 3D Coat years ago, which were subsequently reworked in Zbrush
and printed on my 3D printers.There are many advantages to doing the sculpts in a modeling program rather than in clay,
a couple of the main ones are that you are able to enlarge or shrink the work depending on your needs.Also the work doesn't sit
around in a studio taking up space and perhaps getting destroyed waiting to be cast.I mainly use 3D Coat as a concepting
tool these days, it's perfect for quickly hashing out ideas before 3D printing or creating a clay of the concept.

Anyway I just wanted to share with you how I have used 3D Coat as a tool not only for concepting but for creating bronze
sculptures through 3D printing. I would also like to share with you my new website and to thank Andrew and his team for
reigniting the sculpting spark in me which has lead to me getting back into creating bronzes.It has been a lot of work getting
to this point and hopefully it is just the beginning of a long line of work to come.I have many new works in progress and will
post them on my site as they emerge from my studio.My site is in its early stages and needs a lot of work, but it's a start.

If any of you are interested in casting your work or have any questions on the process let me know I would be happy to chat
with you.

http://sarasinsculpture.com/

Email: lookerfortruth@yahoo.com

Take care and Merry Christmas to you all.

Rick(tree321)

 

P.S: These 3D Coat sample sculpts were created in a very early beta stage of 3D Coat (2009) when there was only a few basic brushes in voxel mode only so forgive the crudeness of the sculpts.

 

capt.jpg

capt3.jpg

capt4.jpg

cheetah-gazlle2-copy.jpg

The-Chase_01.jpg

king.jpg

king2.jpg

crown spirors.3b.jpg

eland.JPG

  • Like 2
  • Thanks 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×