Documentación de 3DCoat 2021

The modeling room is intended for the LOW-poly modeling. It is very similar to the Retopo room but the snapping to the surface is turned off by default. Start from the primitives tool, then continue with the SELECT tool to modify verts/edges/faces. Pay attention that tools list is very dependent on the current mode of selection - vertices, edges or faces.

Agregar/dividir

Ańadir polígonos usando las líneas entre puntos.
En este modo se pueden ańadir nuevos polígonos, así como dividir caras y aristas, y conectar vértices.
Utilizar botón derecho para ajustar bordes/vértices.

toolset: tools_tem("[RetopoTool]TopToolAddPolygones);
script: cmd("$TopToolAddPolygones);

Seleccionar

En este modo pueden seleccionarse vértices, aristas y caras.
Utilizar SHIFT para ańadir elementos y CTRL para eliminarlos.
Seleccionar un elemento con el botón izquierdo, moverlos (deslizar) con botón derecho.
En modo 'cara' usar INSERT para subdividir caras y DEL para borrarlas.
En modo 'borde' usar INSERT para dividir los bordes, BKSP unir bordes, DEL para eliminarlos, L para seleccionar bucles de borde, y R para seleccionar anillos de borde.

toolset: tools_tem("[RetopoTool]TopToolSelectAndOperate);
script: cmd("$TopToolSelectAndOperate);

Select Path

Select Path

toolset: tools_tem("[RetopoTool]SelPath);
script: cmd("$SelPath);

Puntos y caras

Ańadir puntos con botón izquierdo.
Retocar puntos y ańadir caras con botón derecho. (ver vista previa)
Forzar triángulos con SHIFT.

toolset: tools_tem("{POINTPOLQDS}[RetopoTool]TopToolAddPoints);
script: cmd("$TopToolAddPoints);

Cuadrángulos

Seleccionar un borde y ańadir una franja de cuadrángulos.

toolset: tools_tem("{POINTPOLQDS}[RetopoTool]TopToolAddQuads);
script: cmd("$TopToolAddQuads);

3D Primitives

3D Primitives

toolset: tools_tem("{RTPPRIM}[extension]RTP_PRIM);
script: cmd("$RTP_PRIM);

2D Primitives

2D Primitives

toolset: tools_tem("{RTPPRIM}[extension]RTP_PRIM2);
script: cmd("$RTP_PRIM2);

R-Fill
Tool options...

This is a Quad Fill tool, designed to fill holes in a mesh with proper topological flow

toolset: tools_tem("{RTPFILL}[extension]RFill);
script: cmd("$RFill);

Tapa

Herramienta tapa - llenar los agujeros con un solo clic

toolset: tools_tem("{RTPFILL}[RetopoTool]TopToolAddCaps);
script: cmd("$TopToolAddCaps);

Knife
Tool options...

Cut a face by Knife. Draw the line and press ENTER.

toolset: tools_tem("[extension]RtKnife);
script: cmd("$RtKnife);

Spine Tool
Tool options...

Extrude selected faces along Arc. Angle and Axis of the Arc can edit by Gizmo. You can edit Qty of Segment and Scale factor.

toolset: tools_tem("[extension]SpineTool);
script: cmd("$SpineTool);

Smart Extrude
Tool options...

Extrude face or edge along any direction.Also you can scale and rotate a selected faces or edges.

toolset: tools_tem("{EXTRD}[extension]RtExtrudeFreeSl);
script: cmd("$RtExtrudeFreeSl);

Free Extrude

Extrude in any direction. Pay attention that new vertices will not be snapped automatically, but they will snap in further operations if you don't turn off Auto snap

toolset: tools_tem("{EXTRD}[RetopoTool]sfExtrudeFree);
script: cmd("$sfExtrudeFree);

Normal Extrude

Extrude along average normal direction. Pay attention that new vertices will not be snapped automatically, but they will snap in further operations if you don't turn off Auto snap

toolset: tools_tem("{EXTRD}[RetopoTool]sfExtrudeNormal);
script: cmd("$sfExtrudeNormal);

Extrude Faces

Extrude faces so that each face will be moved on the same distance whenever possible. Pay attention that in some cases exactly parallel faces displacement is impossible but 3DCoat tries to displace as exactly as possible.

toolset: tools_tem("{EXTRD}[RetopoTool]sfExtrudeFaces);
script: cmd("$sfExtrudeFaces);

Extrude Vertices

Extrude faces so that each vertex will be displaced on the same distance.

toolset: tools_tem("{EXTRD}[RetopoTool]sfExtrudeVerts);
script: cmd("$sfExtrudeVerts);

Free Moving
Tool options...

Moving selected faces/edges/vertices. By using mouse or Gizmo. If nothing is selected entire mesh will be transformed

toolset: tools_tem("{TRFM}[extension]RtFreeMoving);
script: cmd("$RtFreeMoving);

Free Rotating
Tool options...

Rotating selected faces/edges/vertices. By using mouse or Gizmo. If nothing is selected entire mesh will be transformed

toolset: tools_tem("{TRFM}[extension]RtFreeRotating);
script: cmd("$RtFreeRotating);

Free Scaling
Tool options...

Scaling selected faces/edges/vertices. By using mouse or Gizmo. If nothing is selected entire mesh will be transformed

toolset: tools_tem("{TRFM}[extension]RtFreeScaling);
script: cmd("$RtFreeScaling);

Transform

Transform selected faces/vertices. If nothing is selected entire mesh will be transformed

toolset: tools_tem("{TRFM}[RetopoTool]sfTransform);
script: cmd("$sfTransform);

Surface Swept
Tool options...

Mesh generating by moving profile along selected curve-guide. The grid step frequency is regulated in 2 directions by U,V Spanse.

toolset: tools_tem("{SWEPTSURF}[extension]MdlSurfaceSwept);
script: cmd("$MdlSurfaceSwept);

Profile
Tool options...

Mesh generating by moving profile along selected curve-guide. The grid step frequency is regulated in 2 directions by U,V Spanse.

toolset: tools_tem("{SWEPTSURF}[extension]MdlProfileSurface);
script: cmd("$MdlProfileSurface);

Rotate Surface
Tool options...

The Rotate surface will be generated by revolution the selected profile around selected curve-axis. The grid step frequency is regulated in 2 directions by U,V Spanse.

toolset: tools_tem("{ROTATESRF}[extension]MdlSurfaceRotate);
script: cmd("$MdlSurfaceRotate);

Polyhedron
Tool options...

The Polyhedron will be generated by revolution and moving the selected profile around selected curve-axis. The grid step frequency is regulated in 2 directions by U,V Spanse.

toolset: tools_tem("{ROTATESRF}[extension]MdlSurfacePrism);
script: cmd("$MdlSurfacePrism);

Surface by two view
Tool options...

The Mesh generating by moving two conic along curve-guide. You can edit curve.

toolset: tools_tem("{CONICSRF}[extension]MdlShapeSurface);
script: cmd("$MdlShapeSurface);

Surface by two view

The Mesh generating by moving two Conic along curve-guide. You can edit curve-guide and Conic by Parameter.

toolset: tools_tem("{CONICSRF}[extension]MdlCinematicSurface);
script: cmd("$MdlCinematicSurface);

Surface Swept 2
Tool options...

>Mesh generating by moving profile along two selected curve-guide. The grid step frequency is regulated in 2 directions by U,V Spanse.

toolset: tools_tem("[extension]MdlSurfaceSwept2);
script: cmd("$MdlSurfaceSwept2);

Loft Surface
Tool options...

Loft Surfaces are surfaces generated by multiple Curves creating a smooth tangency between the selected curves. Mesh generating by moving across selected curve-section. The grid step frequency is regulated in 2 directions by U,V Spanse.

toolset: tools_tem("[extension]MdlSurfaceLofte);
script: cmd("$MdlSurfaceLofte);

Swept N Gener
Tool options...

The Sweep Surfaces will be generated by by moving N profiles along two curve-guide. After appear Tool Options dialog You need select second guide and curve-profiles. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]MdlSurfaceNGenerTwoGuide);
script: cmd("$MdlSurfaceNGenerTwoGuide);

Brocha

Esta herramienta funciona de manera similar a una selección suave.
Los vértices más cercanos al centro del cursor de la brocha se mueve más que los que están en los bordes exteriores.
Utilizar SHIFT para suavizar el espaciado del vértice.

toolset: tools_tem("[RetopoTool]TopToolTweakWithBrush);
script: cmd("$TopToolTweakWithBrush);

Borrar polígonos

Hacer clic aquí para suprimir polígonos.
Utilizar CTRL para borrar conjuntos de polígonos conectados.

toolset: tools_tem("[RetopoTool]TopToolDeletePolygones);
script: cmd("$TopToolDeletePolygones);

Borrar bordes

Eliminar bordes, anillos de borde, o bucles de borde.
Utilizar CTRL para seleccionar rápidamente bucles de borde.

toolset: tools_tem("[RetopoTool]TopToolDeleteEdges);
script: cmd("$TopToolDeleteEdges);

Unir

Usar el botón izquierdo en un borde para unirlo.
Utilizar CTRL+botón izquierdo para unir los anillos de borde.

toolset: tools_tem("[RetopoTool]TopToolCollapseEdges);
script: cmd("$TopToolCollapseEdges);

Separar anillos

Separar anillos de borde con una línea.

toolset: tools_tem("[RetopoTool]TopToolSplitEdges);
script: cmd("$TopToolSplitEdges);

Mover vértices

Retocar vértices, aristas y caras.

toolset: tools_tem("[RetopoTool]TopToolTweakVerts);
script: cmd("$TopToolTweakVerts);

Deslizar bordes

Utilizar botón izquierdo para deslizar los bordes.
CTRL+botón izquierdo deslizará los bucles de borde.

toolset: tools_tem("[RetopoTool]TopToolSlideEdges);
script: cmd("$TopToolSlideEdges);

Marcar costuras

Marcar costuras en el mapa UV.
CTRL+botón izquierdo desmarca una costura.

toolset: tools_tem("[RetopoTool]TopToolMarkSeams);
script: cmd("$TopToolMarkSeams);

Bucles de borde

Marcar todos los bucles de bordes en el mapa UV.
Utilizar CTRL+botón izquierdo para desmarcarlos.

toolset: tools_tem("[RetopoTool]TopToolMarkEdgeLoops);
script: cmd("$TopToolMarkEdgeLoops);

Borrar

Borrar todas las líneas de la malla.

toolset: tools_tem("[RetopoTool]ClearLines);
script: cmd("$ClearLines);

Suavizado

Suavizar todas las líneas dibujadas en la malla.

toolset: tools_tem("[RetopoTool]SmoothLines);
script: cmd("$SmoothLines);

The next commands are available only if UV - vertex manupulation commands activated.

Borrar

Borrar la selección.

toolset: tools_tem("[RetopoTool]ClearSel);
script: cmd("$ClearSel);

Invertir

Invertir los elementos seleccionados

toolset: tools_tem("[RetopoTool]uvInvSel);
script: cmd("$uvInvSel);

Rotar CW

Rotar en sentido horario

toolset: tools_tem("[RetopoTool]RotateCW);
script: cmd("$RotateCW);

Rotar CCW

Rotar en sentido contrario a las agujas del reloj

toolset: tools_tem("[RetopoTool]RotateCCW);
script: cmd("$RotateCCW);

Voltear U

Voltear caras seleccionadas horizontalmente

toolset: tools_tem("[RetopoTool]FlipU);
script: cmd("$FlipU);

Voltear V

Voltear caras seleccionadas verticalmente

toolset: tools_tem("[RetopoTool]FlipV);
script: cmd("$FlipV);

Relajar

Relajar vértices seleccionados

toolset: tools_tem("[RetopoTool]uvRelax);
script: cmd("$uvRelax);

The next commands are available only if UV - edges manupulation commands activated.

Cloth Relax

Relax UV islands so that opposite edges on edges in quads will get almost the same relation between edges length in space and edge length in UV space. This may be useful for making real things - cloth and soft toys. So, this relaxation type minimizes the edge-length trash.

toolset: tools_tem("[RetopoTool]Relax2);
script: cmd("$Relax2);

A línea

Lugar elegido en bordes a lo largo de la línea

toolset: tools_tem("[RetopoTool]uvToLine);
script: cmd("$uvToLine);

Equidistante

Lugar elegido en bordes a lo largo de la línea y establecer la misma distancia entre puntos.

toolset: tools_tem("[RetopoTool]uvEquidist);
script: cmd("$uvEquidist);

Horizontal

Coloque los bordes a lo largo de las líneas horizontales

toolset: tools_tem("[RetopoTool]uvHorizontal);
script: cmd("$uvHorizontal);

Vertical

Coloque los bordes a lo largo de la línea vertical

toolset: tools_tem("[RetopoTool]uvVertical);
script: cmd("$uvVertical);

LazoBorde

Seleccionar Lazo de borde

toolset: tools_tem("[RetopoTool]uvLoop);
script: cmd("$uvLoop);

AnilloBorde

Seleccionar anillo de borde

toolset: tools_tem("[RetopoTool]uvRing);
script: cmd("$uvRing);

Poner costuras

Marcar bordes y costuras seleccionados

toolset: tools_tem("[RetopoTool]uvSeams);
script: cmd("$uvSeams);

The next commands are available only if UV - faces manupulation commands activated.

Borrar costuras

Eliminar las costuras en los bordes seleccionados

toolset: tools_tem("[RetopoTool]uvClrSeams);
script: cmd("$uvClrSeams);

Estricto

Aplicar el suavizado de la luz a la malla para reducir estiramiento

toolset: tools_tem("[RetopoTool]Strict);
script: cmd("$Strict);

Ocultar

Ocultar caras seleccionadas

toolset: tools_tem("[RetopoTool]uvHide);
script: cmd("$uvHide);

Inv. Oculto

Invertir caras ocultas

toolset: tools_tem("[RetopoTool]uvInvHide);
script: cmd("$uvInvHide);

Mostrar

Mostrar caras seleccionadas

toolset: tools_tem("[RetopoTool]uvUnhide);
script: cmd("$uvUnhide);

Mostrar todo

Mostrar todas las caras ocultas

toolset: tools_tem("[RetopoTool]uvUnhideAll);
script: cmd("$uvUnhideAll);

HD Expand

Expand hidden area.

toolset: tools_tem("[RetopoTool]hdExpand);
script: cmd("$hdExpand);

The next commands are available only if UV - islands manupulation commands activated.

HD Contract

Contract hidden area.

toolset: tools_tem("[RetopoTool]hdContract);
script: cmd("$hdContract);

A ABF

Utilizar ABF++ para desenvolver islas seleccionadas

toolset: tools_tem("[RetopoTool]toABF);
script: cmd("$toABF);

To GU

Unwrap selected islands with 3DCoat's proprietary Globally Uniform UV unwrapping method. This method minimizes the polygons square trash but may lead to bigger angular trash.

toolset: tools_tem("[RetopoTool]toGU);
script: cmd("$toGU);

A LSCM

Utilizar LSCM para desenvolver islas seleccionadas

toolset: tools_tem("[RetopoTool]toLSCM);
script: cmd("$toLSCM);

A Planar

Usar proyección plana para desenvolver islas seleccionadas

toolset: tools_tem("[RetopoTool]toPlanar);
script: cmd("$toPlanar);

Copy UV

Copy island to clipboard (use CTRL+C). You may select other island and paste it there. In so way you will exactly put one island over other one

toolset: tools_tem("[RetopoTool]CopyUV);
script: cmd("$CopyUV);

The next commands are available only if the select/edges tool activated.

Expand

Expand the area of selected elements

toolset: tools_tem("[RetopoTool]sfExpand);
script: cmd("$sfExpand);

Contract

Contract the area of selected elements

toolset: tools_tem("[RetopoTool]sfContract);
script: cmd("$sfContract);

Cut Edges

Cut Edges into equal segments. User will pre-determine the number of segments along the selected edge(s).

toolset: tools_tem("[RetopoTool]sfCutEdges);
script: cmd("$sfCutEdges);

Ajustar

Ajustar vértices de malla retopologizada a la superficie. Sirve de ayuda si se ha cambiado el estado de objetos en la escena y desea volver a ajustar la malla retopologizada.

toolset: tools_tem("[RetopoTool]SnapRT);
script: cmd("$SnapRT);

Scale

Scale selected or entire mesh. Each connective cluster will be transformed separately

toolset: tools_tem("[RetopoTool]ScaleCL);
script: cmd("$ScaleCL);

Relajar

Relajar toda la malla de retopologización

toolset: tools_tem("[RetopoTool]ApplyTSm);
script: cmd("$ApplyTSm);

Girar

Girar los bordes seleccionados.

toolset: tools_tem("[RetopoTool]seSpin);
script: cmd("$seSpin);

Girar hacia atrás

Girar hacia atrás los bordes seleccionados.

toolset: tools_tem("[RetopoTool]seSpinBack);
script: cmd("$seSpinBack);

Extruir

Extruir bordes seleccionados.

toolset: tools_tem("[RetopoTool]seExtrude);
script: cmd("$seExtrude);

Separar

Usar la tecla INSERT para separar bordes seleccionados.

toolset: tools_tem("[RetopoTool]seSplit);
script: cmd("$seSplit);

Unir

Utilizar BKSP para unir los bordes seleccionados.

toolset: tools_tem("[RetopoTool]seCollapse);
script: cmd("$seCollapse);

Eliminar

Usar la tecla SUPR para eliminar los bordes seleccionados.

toolset: tools_tem("[RetopoTool]seDelete);
script: cmd("$seDelete);

Bucle de borde

Oprima L para seleccionar un bucle de borde.
Seleccionar dos bordes de un borde de bucle para limitar el efecto.

toolset: tools_tem("[RetopoTool]seEdgeLoop);
script: cmd("$seEdgeLoop);

Anillo de borde

Presionar R para seleccionar un borde circular. Seleccionar dos bordes en un anillo de borde para limitar el efecto.

toolset: tools_tem("[RetopoTool]seEdgeRing);
script: cmd("$seEdgeRing);

Sel.Sharp

Select sharp edges

toolset: tools_tem("[RetopoTool]seSelSharp);
script: cmd("$seSelSharp);

Bevel

Bevel selected edges

toolset: tools_tem("[RetopoTool]seBevel);
script: cmd("$seBevel);

Split Edge

Split the selected Edges.

toolset: tools_tem("[RetopoTool]rtSpliteEdge);
script: cmd("$rtSpliteEdge);

Bridge

By selecting two edges you can create a face

toolset: tools_tem("[RetopoTool]rtBridge);
script: cmd("$rtBridge);

Store Selection

Store Selection

toolset: tools_tem("[RetopoTool]rtStoreSel);
script: cmd("$rtStoreSel);

Load Selection

Load Selection

toolset: tools_tem("[RetopoTool]rtRecallSel);
script: cmd("$rtRecallSel);

The next commands are available only if the select/vertex tool activated.

Clear Selection

Clear Selection

toolset: tools_tem("[RetopoTool]rtClearSel);
script: cmd("$rtClearSel);

Connect

Connect selected vertices.

toolset: tools_tem("[RetopoTool]sfConnect);
script: cmd("$sfConnect);

Bevel Vertex
Tool options...

Bevels the selected vertex/vertices individually, rather than as a group

toolset: tools_tem("[extension]RtBevelVertex);
script: cmd("$RtBevelVertex);

Weld Vertices
Tool options...

Welds selected Vertices within a pre-determined range in distance (in pixels). Colored Preview lines connecting vertices indicate which ones will be welded together. As you expand the radius these preview connection lines will grow in number. Decreasing the tolerance radius will reduce the number.

toolset: tools_tem("[extension]RtWeldingVertexs);
script: cmd("$RtWeldingVertexs);

The next commands are available only if the select/faces tool activated.

Align Vertices
Tool options...

Alignment Vertexs by Plane.

toolset: tools_tem("[extension]RtAlignmentVertexs);
script: cmd("$RtAlignmentVertexs);

Intrude

Intrude selected faces.

toolset: tools_tem("[RetopoTool]sfIntrude);
script: cmd("$sfIntrude);

Shell

Make shell of selected faces.

toolset: tools_tem("[RetopoTool]sfShell);
script: cmd("$sfShell);

Eliminar

Suprimir las caras seleccionadas.

toolset: tools_tem("[RetopoTool]sfDelete);
script: cmd("$sfDelete);

Clone

Clone selected faces. Transform new mesh piece and press ENTER

toolset: tools_tem("[RetopoTool]sfClone);
script: cmd("$sfClone);

Separate

Clone selected faces to the new group. Boundaries of separated faces cluster will be split from neighbour faces so that you may transform the cluster independently.

toolset: tools_tem("[RetopoTool]sfCutnClone);
script: cmd("$sfCutnClone);

Subdividir

Usar la tecla INSERT para subdividir caras seleccionadas.

toolset: tools_tem("[RetopoTool]sfSubdiv);
script: cmd("$sfSubdiv);

Ocultar

Ocultar caras seleccionadas

toolset: tools_tem("[RetopoTool]sfHide);
script: cmd("$sfHide);

Flip faces

Flip selected faces normals. Be careful! Flipping face adjacent to other face may lead to non-manifold surface and elimination of the face.

toolset: tools_tem("[RetopoTool]rtFlipFaces);
script: cmd("$rtFlipFaces);

Invertir oculto

Invertir el estado de todas las caras ocultas

toolset: tools_tem("[RetopoTool]sfInvHidden);
script: cmd("$sfInvHidden);

Mostrar

Mostrar todas las caras

toolset: tools_tem("[RetopoTool]sfUnhide);
script: cmd("$sfUnhide);

Poke Face

Poke of the selected Face.

toolset: tools_tem("[RetopoTool]rtPoke);
script: cmd("$rtPoke);

InSet

Add polygons to Selected poligons.

toolset: tools_tem("[RetopoTool]InSet);
script: cmd("$InSet);

Importar

Importar malla de retopologización

toolset: tools_tem("[RetopoTool]ImportRM);
script: cmd("$ImportRM);

Exportar

Exportar malla de retopologización

toolset: tools_tem("[RetopoTool]ExportRM);
script: cmd("$ExportRM);

Subdividir

Subdividir malla de retopologización

toolset: tools_tem("[RetopoTool]ApplyTS);
script: cmd("$ApplyTS);

Smooth Selection CC

Subdivide and smooth selected faces using the Catmull-Clark algorithm.

toolset: tools_tem("[RetopoTool]sfSmooth);
script: cmd("$sfSmooth);

Borrar

Borrar malla de retopologización

toolset: tools_tem("[RetopoTool]ClearTM);
script: cmd("$ClearTM);

Simetría

Aplicar simetría a la malla

toolset: tools_tem("[RetopoTool]ApplyTSym);
script: cmd("$ApplyTSym);

Desplegar

Ajustar todos los grupos en la textura.

toolset: tools_tem("[RetopoTool]Unwrap);
script: cmd("$Unwrap);

Save Contour

This command allows to save contour in real scale as EPS or DXF for further laser cutting. Length of lines corresponds to geometrical length. It is helpful if you want to cut shape using laser cutter and glue parts together

toolset: tools_tem("[RetopoTool]rLazerCut);
script: cmd("$rLazerCut);