Imigaqo esisiseko ye-poly modeling ephantsi
Imodeli ye-3D yinkqubo yokwenza into ye-3D ngoncedo lweenkqubo ezahlukeneyo ezenzelwe yona. Imodeli ye-3D inonxantathu abachaza imilo yento. Ukuze kube lula ukusebenza, oonxantathu badityaniswe kwizikwere. Kwinkqubo yokulinganisa i-3D modeler usebenzisa imisebenzi eyahlukeneyo kunye nezixhobo ezisebenzisa izikwere (i-polygons) yenza iifom zaluphi na ubunzima (imodeli ye-3D).
Zininzi iinkqubo ezikhoyo, kodwa siza kuthetha ngemodeli ephantsi yepoly kwi- 3DCoat .
Kukho iintlobo ezi-2 eziphambili zokuchaza into enepolygonal: iPoly ephantsi, iPoly ephezulu.
I-Low Poly yinto enenani elincinane leepoligoni. Zisenokungabonakali zigudileyo, kodwa zifanelekile kwiiprojekthi ezinexesha lokwenyani elinikezelayo, njengemidlalo, njengoko zifuna izixhobo ezincinci zekhadi levidiyo.
Imifuziselo yePoly ephezulu ayinamda kwinani leepoligoni. Zijongeka zigudile kwaye zisetyenziswa kwiikhathuni, iimuvi, umbono woyilo, ubugcisa bombono kunye nokunye.
Ke, ukuze uqale ukwenza iimodeli zepoly ephantsi udinga imodeli yokuqala. Kukho isixhobo sePrimitive kule nto.
Kolu ngcelele lwe-GIFs siza kukubonisa ukuyilwa kwemodeli ye-3D engantsonkothanga.
Esinye sezixhobo ezibaluleke kakhulu zokubonisa i-Extrude. Kukho iinguqu ezininzi zesixhobo sokukhupha kwi- 3DCoat.
- Yandisa ubuso
- Khupha iVertex
- Extrude Normal
- Ungenele
- Iqokobhe
I-Symmetry sisixhobo esibaluleke kakhulu kwaye esifanelekileyo. Kukho iintlobo ezininzi ze-symmetry:
- x, y, z isipili
- I-Symmetry yeRadial
- Isipili seRadial
Kwi-gif ungabona umsebenzi we-Radial symmetry.
Ngesi sixhobo unokwenza izinto ezinzima ngokukhawuleza. Xa into ilungile kufuneka usebenzise i-symmetry. Ukwenza oku, kwi- Retopo -Faka i-Symmetry kuwo wonke amaleya okanye Faka i-Symmetry kuLuhlu lwangoku.
Kwiimeko ezininzi, yenziwa kuqala imodeli ephantsi yepoly, kwaye emva koko imodeli ephezulu yepoly yenziwe kusetyenziswa i-Subdivide kunye nomsebenzi weRelax.
Ukuze imodeli ingabikho emva kokusetyenziswa kwe-Subdivide kunye ne-Relax izixhobo kwaye ibonakale ichanekile, kuyimfuneko ukudala i-topology yayo echanekileyo.
Ke kwimodeli kuzo zonke ii-engile ezibukhali kufuneka kubekho ubuncinci iipoligoni ezi-3 ukuze emva kokugudisa i-engile ihlale injengoko ibinjalo.
Kukho isixhobo esifana nesi seBevel esahlula imiphetho. Ngesixhobo sokuHlukanisa okanye soBuso beNgcaciso unokongeza imiphetho emitsha.
I-3DCoat inezixhobo ezininzi ezahlukeneyo zokwenza iiModeli zePoly eziPhakamileyo kunye ne-3D ePhakamileyo. Unokwenza iMaphu ye- UV yomzekelo kwangoko kule nkqubo. Ukuze ufunde ngazo zonke izixhobo ungazama inkqubo ngoku.
