3DCoat 2021文档

构成

通过局部对象选择转置对象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_TRANSPOSE);
script: cmd("$SCULPT_TRANSPOSE);

移动

移动表面区域. 按下并拖动LMB可相对于屏幕视图移动光标内的表面. 使用CTRL键可沿法线移动表面. 不同的Alpha通道会产生不同的结果

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_MOVE);
script: cmd("$SCULP_MOVE);

变换

将对象作为整体进行变换. 在对象上点击可进行变换

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_TRANSFORM);
script: cmd("$SCULPT_TRANSFORM);

基本体
Tool options...

在圆内部拖动鼠标可在屏幕空间移动对象. 按键'X', 'Y', 'Z'可约束运动. 按SHIFT键, CTRL键, SHIFT+CTRL组合键移动方向箭头和齿轮可进行离散运动和旋转

toolset: tools_tem("[extension]SCULP_PRIM);
script: cmd("$SCULP_PRIM);

导入

将对象导入进场景. 按ENTER键可应用所选对象. 在没有半自交点的情况下对象应是封闭的. 使用笔刷/移动/旋转/缩放这几种模式可放置对象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_MERGE);
script: cmd("$SCULP_MERGE);

曲线
Tool options...

使用曲线(样条)绘制. 使用LMB添加点, 使用RMB调整大小, 使用BKSP键删除最后那个点. 按ENTER键可绘制曲线, 然后按ESC键可删除该曲线. 在球体上使用CTRL键+LMB可连接点

toolset: tools_tem("[extension]SCULP_CURVES);
script: cmd("$SCULP_CURVES);

文本
Tool options...

在体积上绘制文本

toolset: tools_tem("[extension]SCULP_TEXT);
script: cmd("$SCULP_TEXT);

Logo

使用此工具将任意抗锯齿的黑白图像转换为3D对象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_LOGO);
script: cmd("$SCULPT_LOGO);

蛇形

绘制'蛇形'. 使用LMB就可借助此工具进行绘制. 如有可能, 蛇形会趋向与相邻的表面连接. 在描边的末端按下LMB可平滑样条, 直到其被释放. 使用滑块调节平滑速度. 可从有效的管道外形中选取蛇形形状

toolset: tools_tem("{Snake}[extension]SCULP_SPSTROKE);
script: cmd("$SCULP_SPSTROKE);

毛刺

绘制毛刺. 使用LMB就可借助此工具进行绘制. 毛刺会独立于相邻的表面存在, 其前端将逐渐变成点. 在描边的末端按下LMB可平滑样条, 直到其被释放. 使用滑块调节平滑速度. 可从有效的管道外形中选取毛刺形状

toolset: tools_tem("{Snake}[extension]SCULP_FREESP);
script: cmd("$SCULP_FREESP);

切除
Tool options...

切除

toolset: tools_tem("[extension]CutOff);
script: cmd("$CutOff);

Measure
Tool options...

Click to add points. Use SHIFT to align lines horizontally, vertically or diagonally. Press ESC to stop measure guide creation. New click will start new guide. Click on lines and points to split lines or drag points. Measure guides may be used in other tools as visual markers or snapping guides.
Doubleclick to erase point. Move nearby points together to erase captured point. Use CTRL to avoid snapping to existing points or lines, for example when you need to start new line from existing point or line.

点击可添加点. 使用SHIFT键可水平, 垂直或对角对齐线. 按ESC键可停止测量辅助线的创建. 点击"新建"将启用新的辅助线. 在线上和点上点击可拆分线或拖动点. 测量辅助线可被作为可视标记或对齐辅助线用在其它工具中.
双击可擦除点. 同时移动附近的点可擦除捕捉到的点. 使用CTRL键可避免对齐已有点或线, 例如您需要从已有点或线启用新线的情况.

toolset: tools_tem("[extension]Measure);
script: cmd("$Measure);

Noise

toolset: tools_tem("[extension]Noise);
script: cmd("$Noise);

轴向
Tool options...

Create a Radial Array. Any Voxel Layer can be duplicated and rotated in number and angle from a central axis

toolset: tools_tem("[extension]SCULPT_AXIAL);
script: cmd("$SCULPT_AXIAL);

增加分辨率

增加当前对象的分辨率

toolset: tools_tem("[VOX_SCULPT_TOOL]IncRes);
script: cmd("$IncRes);

重采样

更改对象的分辨率

toolset: tools_tem("[VOX_SCULPT_TOOL]Resample);
script: cmd("$Resample);

清除

清除当前对象

toolset: tools_tem("[VOX_SCULPT_TOOL]Clear);
script: cmd("$Clear);

涂层
Tool options...

此工具允许以无损方式在图层之上添加涂层. 这类似于体素图层, 不过您可使用曲线定义区域, 之后更改拐角点.

toolset: tools_tem("[extension]CurvesLayer);
script: cmd("$CurvesLayer);

Tube/Array
Tool options...

Tube/Array

toolset: tools_tem("[extension]TubeOnCurve);
script: cmd("$TubeOnCurve);

Bend Volume
Tool options...

Bend the object around the curve.

toolset: tools_tem("[extension]BendVolume);
script: cmd("$BendVolume);

Swep along Guide
Tool options...

The swept surface will be generated by moving profile along selected curve-guide. After appear Tool Options dialog You need select profile-curve. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, angle, twist-angle, etc. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SweptSurface);
script: cmd("$SweptSurface);

Rotate Surface
Tool options...

The Rotate surface will be generated by revolution the selected profile around selected curve-axis. After appear "Tool Options dialog" You need select curve-axis. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Angle, TwistAngle, etc. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]RotateSurface);
script: cmd("$RotateSurface);

Polyhedron
Tool options...

The Polyhedron will be generated by revolution ang moving the selected profile around selected curve-axis. After appear "Tool Options dialog" You need select curve-axis. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SurfacePrism);
script: cmd("$SurfacePrism);

Swept 2 Guide
Tool options...

The Sweep Surfaces will be generated by the moving profile along 2 curve guides. After \"Tool Options dialog\" appears, you must select 2 curves: guide curve and curve profile. The new item will be created in VoxTree and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, number of faces, smoothing. Delete the corresponding VoxTree object to stop filling the curve

toolset: tools_tem("[extension]SurfaceSwept2);
script: cmd("$SurfaceSwept2);

Swept 2 Gener
Tool options...

The Sweep Surface will be generated by by moving of 2 profiles along the selected guide-curve. After appear "Tool Options dialog" You need select second guide and curve-profile. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SurfaceSwept2Gener);
script: cmd("$SurfaceSwept2Gener);

构造器
Tool options...

Simplifies the 3D modeling process for PixelArt using basic geometric shapes as bricks

toolset: tools_tem("[extension]PixelArt);
script: cmd("$PixelArt);

素描
Tool options...

从对象的2个或3个投影创建体积对象

toolset: tools_tem("[extension]SCULP_SKETCH);
script: cmd("$SCULP_SKETCH);

肌肉

肌肉工具. 触笔压力和深度强度决定了肌肉的厚度. 您可关闭"压力取决于半径"选项来获取更精确的结果

toolset: tools_tem("[extension]SCULP_MUSCLE);
script: cmd("$SCULP_MUSCLE);

变弯
Tool options...

绕圆变弯(弯曲)对象

toolset: tools_tem("[extension]SCULP_WRAP);
script: cmd("$SCULP_WRAP);

全部平滑

平滑(松弛)当前对象

toolset: tools_tem("[VOX_SCULPT_TOOL]SmAll);
script: cmd("$SmAll);