3DCoat 2021文档

黏土

压平表面并使用alpha通道, 模版和智能材质对其挤压

toolset: tools_tem("[extension]SCULP_SCLAY);
script: cmd("$SCULP_SCLAY);

绘制

使用LMB可突起光标下方的区域. 使用CTRL键+LMB可内缩表面, 使用SHIFT键+LMB可平滑几何体

toolset: tools_tem("[extension]SCULPT_DRAW);
script: cmd("$SCULPT_DRAW);

压平

此模式用于通过将点突起到或下沉到共同平面来压平光标下方的表面. 高度和角度是直接求自光标中心下方点的平均值, 扩张此效果便可填充整个光标区域

toolset: tools_tem("{FLT}[extension]SCULP_PLANE);
script: cmd("$SCULP_PLANE);

刻

其作用效果相当于刮擦, 不过会轻微钻进表面. 这对于创建锐利边缘非常方便. CTRL键用于相反动作

toolset: tools_tem("{FLT}[extension]SCULP_PLANE2);
script: cmd("$SCULP_PLANE2);

Flat Polish

Flat Polish

toolset: tools_tem("{FLT}[extension]FlatPolish);
script: cmd("$FlatPolish);

Trim adaptive

Trim adaptive

toolset: tools_tem("{FLT}[extension]trim_adaptive);
script: cmd("$trim_adaptive);

填充

填充空腔. 使用CTRL键可取反该动作 - 可消除"浮雕"

toolset: tools_tem("{FILL}[extension]SCULP_SFILL);
script: cmd("$SCULP_SFILL);

琵琶

此工具允许填充空腔, 就好似您正在弹琵琶一样. 开始用低压力填充, 结束用较大压力就可获取精确结果. 将此工具与平滑操作结合可获得完美结果

toolset: tools_tem("{FILL}[extension]SCULP_SFILL2);
script: cmd("$SCULP_SFILL2);

构建

像"粘土"工具一样的表现, 不过能无限制的构建表面 (与粘土一样不止一个图层)

toolset: tools_tem("[extension]BUILDUP);
script: cmd("$BUILDUP);

挤压

挤压表面

toolset: tools_tem("[extension]SCULP_SFEXTRUDE0);
script: cmd("$SCULP_SFEXTRUDE0);

扩张

沿着顶点法线方向挤压表面

toolset: tools_tem("[extension]SCULP_INFLATE);
script: cmd("$SCULP_INFLATE);

绝对

绝对挤压 - 相对于初始表面形状

toolset: tools_tem("[extension]SCULP_SFEXTRUDEA);
script: cmd("$SCULP_SFEXTRUDEA);

快速

对于快速形状生成是非常快的

toolset: tools_tem("{RAPID}[extension]SCULPT_RAPID);
script: cmd("$SCULPT_RAPID);

快速2

快速工具的光滑版本

toolset: tools_tem("{RAPID}[extension]RAPID2);
script: cmd("$RAPID2);

划痕

沿着描边绘制划痕. 划痕会像粘土那样消退已有几何体

toolset: tools_tem("{RAPID}[extension]SCULPT_CLAWS);
script: cmd("$SCULPT_CLAWS);

泥浆

绘制噪声粘土条带

toolset: tools_tem("{RAPID}[extension]SCULPT_MUD);
script: cmd("$SCULPT_MUD);

箍缩

箍缩. 此选项用于绘制靠近光标的径向中心的表面区域. 使用CTRL键可使表面从光标中心向外扩张

toolset: tools_tem("{PINCH}[extension]SCULPT_PINCH);
script: cmd("$SCULPT_PINCH);

Roof Pinch

The "Roof pinch" tries to pinch the surface toward to line picked smartly. The diffetence with Smart pinch is that this tool keeps the surface noise instead of flattening. The tool picks two points - one on the left and one on the right side of the brush. Then it builds 2 planes from that points and pinches the surface to the planes intersection.

toolset: tools_tem("{PINCH}[extension]RoofPinch);
script: cmd("$RoofPinch);

Smart Pinch

Smart Pinch tries to pinch the surface toward to line picked, smartly. The tool picks two points - one on the left and one on the right side of the brush. Then it builds 2 planes from those points and snaps surface to the closest plane. Also it adds a little pinch to underestimate the sharpness of the angle.

toolset: tools_tem("{PINCH}[extension]SmartPinch);
script: cmd("$SmartPinch);

平移

此模式用于沿相对于屏幕空间的描边运动滑动几何点

toolset: tools_tem("[extension]SCULP_FOLLOW);
script: cmd("$SCULP_FOLLOW);

Smooth

Smooth the surface

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_SMOOTH1);
script: cmd("$SCULPT_SMOOTH1);

平滑

平滑表面

toolset: tools_tem("{RELAX}[VOX_SCULPT_TOOL]SCULPT_SMOOTH);
script: cmd("$SCULPT_SMOOTH);

Super Relax

This is a powerful, valence-independent relax brush. It converts surface to the regular grid, relaxes, then bakes it back.

toolset: tools_tem("{RELAX}[extension]SuperRelax);
script: cmd("$SuperRelax);

Smooth Convex

Smooth Convex

toolset: tools_tem("{RELAX}[extension]smooth_convex);
script: cmd("$smooth_convex);

Smooth Concave

Smooth Concave

toolset: tools_tem("{RELAX}[extension]smooth_concave);
script: cmd("$smooth_concave);

Tangent

Tangent

toolset: tools_tem("{RELAX}[extension]TangentRelax);
script: cmd("$TangentRelax);

Sharpen

toolset: tools_tem("[extension]Sharpen);
script: cmd("$Sharpen);

冻结

冻结表面的某些部分. 使用CTRL键+D可清除冻结部分, 使用CTRL+SHIFT+I组合键可取反冻结

toolset: tools_tem("{MASK}[VOX_SCULPT_TOOL]SCULP_SFREEZE);
script: cmd("$SCULP_SFREEZE);

表面隐藏

Brush or use Stroke Draw mode to hide portions of the selected VoxTree object. To unhide, chose that option from the Geometry Menu.

toolset: tools_tem("{MASK}[VOX_SCULPT_TOOL]SurfHide);
script: cmd("$SurfHide);

蛇形粘土

蛇形粘土

toolset: tools_tem("[extension]SnakeClay);
script: cmd("$SnakeClay);

Magnify SL
Tool options...

Magnify SL_Magnify Depth stored in the selected Sculpt Layer. CTRL will reduce depth

toolset: tools_tem("[extension]MagnifyLayers);
script: cmd("$MagnifyLayers);

快速拾取

拾取当前雕刻对象. 在对象上点击可选取当前对象. 其它方法 - 在任何其它工具中使用'H'快捷键可拾取当前对象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_PICK);
script: cmd("$SCULPT_PICK);

构成

通过局部对象选择转置对象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_TRANSPOSE);
script: cmd("$SCULPT_TRANSPOSE);

移动

移动表面区域. 按下并拖动LMB可相对于屏幕视图移动光标内的表面. 使用CTRL键可沿法线移动表面. 不同的Alpha通道会产生不同的结果

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_MOVE);
script: cmd("$SCULP_MOVE);

变换

将对象作为整体进行变换. 在对象上点击可进行变换

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_TRANSFORM);
script: cmd("$SCULPT_TRANSFORM);

实例

此工具将用于制作实例. 实例是已有对象的引用, 因此它们几乎不占用内存. 如果您使用的某一元素可在单独的体积中被多次使用, 那您就可以将其用作实例. 例如, 它可以是砖块或某个机械零件. 您可以创建镜像实例, 例如左右手臂

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_INST);
script: cmd("$SCULP_INST);

Base brush

Press RMB and duplicate this brush to create the new brush.

toolset: tools_tem("[extension]BaseBrush);
script: cmd("$BaseBrush);

切除
Tool options...

切除

toolset: tools_tem("[extension]CutOff);
script: cmd("$CutOff);

Noise

toolset: tools_tem("[extension]Noise);
script: cmd("$Noise);

封闭孔洞

封闭孔洞

toolset: tools_tem("{HEAL}[extension]CloseHole);
script: cmd("$CloseHole);

Reconstruct
Tool options...

Reconstructs Mesh locally, beneath the brush; generally to repair flaws in the mesh.

toolset: tools_tem("{HEAL}[extension]Reconstruct);
script: cmd("$Reconstruct);

MeshDoctor
Tool options...

toolset: tools_tem("{HEAL}[extension]MeshDoctor);
script: cmd("$MeshDoctor);

清理粘土
Tool options...

清理粘土

toolset: tools_tem("{HEAL}[extension]CleanClay);
script: cmd("$CleanClay);

填充孔洞
Tool options...

填充网格中的孔洞, 通过此选项可采用周围网格的轮廓

toolset: tools_tem("[extension]FillHoles);
script: cmd("$FillHoles);

多边形移除
Tool options...

在您的雕刻上用遮罩绘制某个区域来完全删除遮蔽区域中的受影响多边形

toolset: tools_tem("[extension]PaintHole);
script: cmd("$PaintHole);

变角器
Tool options...

此工具允许在所选区域内创建锐利区域. 使用冻结工具选取区域, 然后按"应用"按钮. 区域内的表面将在所选部分边缘处被近似为延长(外推)表面方向

toolset: tools_tem("[extension]SuperPinch);
script: cmd("$SuperPinch);

平滑器
Tool options...

此工具的作用就好似您正在对所选区域进行无数次平滑操作. 就连大的细节您可使用此工具对其溶解. 使用"保留表面"选项可平滑细节, 不过会保留整体表面流向 (在有可能时)

toolset: tools_tem("[extension]InfSmooth);
script: cmd("$InfSmooth);

Subdivide
Tool options...

Subdivide surface with Loop subdivision method. Select area to subdivide and use Tool Options

toolset: tools_tem("[extension]Subdivide);
script: cmd("$Subdivide);

Measure
Tool options...

Click to add points. Use SHIFT to align lines horizontally, vertically or diagonally. Press ESC to stop measure guide creation. New click will start new guide. Click on lines and points to split lines or drag points. Measure guides may be used in other tools as visual markers or snapping guides.
Doubleclick to erase point. Move nearby points together to erase captured point. Use CTRL to avoid snapping to existing points or lines, for example when you need to start new line from existing point or line.

点击可添加点. 使用SHIFT键可水平, 垂直或对角对齐线. 按ESC键可停止测量辅助线的创建. 点击"新建"将启用新的辅助线. 在线上和点上点击可拆分线或拖动点. 测量辅助线可被作为可视标记或对齐辅助线用在其它工具中.
双击可擦除点. 同时移动附近的点可擦除捕捉到的点. 使用CTRL键可避免对齐已有点或线, 例如您需要从已有点或线启用新线的情况.

toolset: tools_tem("[extension]Measure);
script: cmd("$Measure);

3D Print Supports
Tool options...

This is a Supports Creation Tool specific to 3D Printing, wherin extended portions of a model need support elements to deliver a proper printing result

toolset: tools_tem("[extension]Supports);
script: cmd("$Supports);

体素光线
Tool options...

This tool allows the model to be visualized in realtime, with an interactive slicing plane

toolset: tools_tem("[extension]VoXRay);
script: cmd("$VoXRay);

Extrude Faces
Tool options...

Extrude Faces

toolset: tools_tem("[extension]ExtrudeFaces);
script: cmd("$ExtrudeFaces);

Bridge
Tool options...

toolset: tools_tem("[extension]Bridge);
script: cmd("$Bridge);

浅浮雕

创建浅浮雕. 此工具用于在平面的一边制作"半高"细节, 之后在特殊方向上挤压这些细节. 当系数被设为高于或低于1时, 工具的箭头端就会出现定向逐渐减少或压扁. 而工具的球形端始终将形态的外形高点挤压向球的位置和方向

toolset: tools_tem("[extension]SCULPT_BARELIEF);
script: cmd("$SCULPT_BARELIEF);

贴合
Tool options...

将某一对象贴合其它对象. 您可标记对应的特征并将对象放置在一起. 在做完近似放置之后, 您就可进行精确放置了, 对应的特征将彼此缝合

toolset: tools_tem("[extension]FitTool);
script: cmd("$FitTool);

Reproject
Tool options...

Allows the user to reproject the details and vertex paint from one or more meshes in the scene, to another mesh. Either to the entire mesh or locally using a brush

toolset: tools_tem("[extension]Reproject);
script: cmd("$Reproject);

Bend

Bend the object around the axis

toolset: tools_tem("[extension]SCULP_BEND);
script: cmd("$SCULP_BEND);

Twist

Twist the object

toolset: tools_tem("[extension]SCULP_TWIST);
script: cmd("$SCULP_TWIST);

变弯
Tool options...

绕圆变弯(弯曲)对象

toolset: tools_tem("[extension]SCULP_WRAP);
script: cmd("$SCULP_WRAP);

基本体
Tool options...

在圆内部拖动鼠标可在屏幕空间移动对象. 按键'X', 'Y', 'Z'可约束运动. 按SHIFT键, CTRL键, SHIFT+CTRL组合键移动方向箭头和齿轮可进行离散运动和旋转

toolset: tools_tem("[extension]SCULP_PRIM);
script: cmd("$SCULP_PRIM);

导入

将对象导入进场景. 按ENTER键可应用所选对象. 在没有半自交点的情况下对象应是封闭的. 使用笔刷/移动/旋转/缩放这几种模式可放置对象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_MERGE);
script: cmd("$SCULP_MERGE);

Logo

使用此工具将任意抗锯齿的黑白图像转换为3D对象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_LOGO);
script: cmd("$SCULPT_LOGO);

拆分和关节
Tool options...

此工具允许将您的模型拆分成多个部分且在部分间创建关节. 它通过圆切割模型. 请注意, 圆应至少将模型拆分成2部分, 因此请小心放置圆

toolset: tools_tem("[extension]SplitNJoint);
script: cmd("$SplitNJoint);

拆分
Tool options...

通过E模式选择可拆分(打破)块上体积. 您可同时拆分多个体积和实例. 这对于创建某一对象的破碎状态特别有用

toolset: tools_tem("[extension]SCULPT_RECTSPLIT);
script: cmd("$SCULPT_RECTSPLIT);

克隆
Tool options...

克隆所选块

toolset: tools_tem("{clone}[extension]SCULPT_CLONE);
script: cmd("$SCULPT_CLONE);

剪切和克隆

剪切当前图层的一部分并将其作为独立对象导入

toolset: tools_tem("{clone}[extension]SCULPT_CUTNCLONE);
script: cmd("$SCULPT_CUTNCLONE);

体素挤压
Tool options...

Works similar to Vox Layer without creating a new object layer but switching the entire layer to Surface mode

toolset: tools_tem("[extension]VoxExtrude);
script: cmd("$VoxExtrude);

点/面

使用LMB添加点. 使用RMB调整点和添加面. (看预览) 使用SHIFT键强制围成三角形. 为更准确地放置四边面可按住光标靠近可能四边面的中心

toolset: tools_tem("[RetopoTool]TopToolAddPoints);
script: cmd("$TopToolAddPoints);

蛇形

绘制'蛇形'. 使用LMB就可借助此工具进行绘制. 如有可能, 蛇形会趋向与相邻的表面连接. 在描边的末端按下LMB可平滑样条, 直到其被释放. 使用滑块调节平滑速度. 可从有效的管道外形中选取蛇形形状

toolset: tools_tem("{snake}[extension]SCULP_SPSTROKE);
script: cmd("$SCULP_SPSTROKE);

毛刺

绘制毛刺. 使用LMB就可借助此工具进行绘制. 毛刺会独立于相邻的表面存在, 其前端将逐渐变成点. 在描边的末端按下LMB可平滑样条, 直到其被释放. 使用滑块调节平滑速度. 可从有效的管道外形中选取毛刺形状

toolset: tools_tem("{snake}[extension]SCULP_FREESP);
script: cmd("$SCULP_FREESP);

牙膏

体积构建工具. 其作用效果相当于蛇形工具, 不过却使用alpha通道来调节样条外形

toolset: tools_tem("{snake}[extension]SCULP_TUBE);
script: cmd("$SCULP_TUBE);

肌肉

肌肉工具. 触笔压力和深度强度决定了肌肉的厚度. 您可关闭"压力取决于半径"选项来获取更精确的结果

toolset: tools_tem("{snake}[extension]SCULP_MUSCLE);
script: cmd("$SCULP_MUSCLE);

布料
Tool options...

实时布料仿真器. 请不要忘记按ENTER键将布料烘焙到当前体积对象. 而且在应用给对象之前最好将布料细分多次

toolset: tools_tem("{snake}[extension]SCULP_CLOTH);
script: cmd("$SCULP_CLOTH);

曲线
Tool options...

使用曲线(样条)绘制. 使用LMB添加点, 使用RMB调整大小, 使用BKSP键删除最后那个点. 按ENTER键可绘制曲线, 然后按ESC键可删除该曲线. 在球体上使用CTRL键+LMB可连接点

toolset: tools_tem("[extension]SCULP_CURVES);
script: cmd("$SCULP_CURVES);

文本
Tool options...

在体积上绘制文本

toolset: tools_tem("[extension]SCULP_TEXT);
script: cmd("$SCULP_TEXT);

体素图层
Tool options...

围绕当前体积的冻结区域创建薄图层. 使用冻结绘制可标记区域, 然后按"应用"按钮确认

toolset: tools_tem("[extension]VoxLayer);
script: cmd("$VoxLayer);

涂层
Tool options...

此工具允许以无损方式在图层之上添加涂层. 这类似于体素图层, 不过您可使用曲线定义区域, 之后更改拐角点.

toolset: tools_tem("[extension]CurvesLayer);
script: cmd("$CurvesLayer);

Tube/Array
Tool options...

Tube/Array

toolset: tools_tem("[extension]TubeOnCurve);
script: cmd("$TubeOnCurve);

Bend Volume
Tool options...

Bend the object around the curve.

toolset: tools_tem("[extension]BendVolume);
script: cmd("$BendVolume);

Swep along Guide
Tool options...

The swept surface will be generated by moving profile along selected curve-guide. After appear Tool Options dialog You need select profile-curve. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, angle, twist-angle, etc. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SweptSurface);
script: cmd("$SweptSurface);

Rotate Surface
Tool options...

The Rotate surface will be generated by revolution the selected profile around selected curve-axis. After appear "Tool Options dialog" You need select curve-axis. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Angle, TwistAngle, etc. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]RotateSurface);
script: cmd("$RotateSurface);

Polyhedron
Tool options...

The Polyhedron will be generated by revolution ang moving the selected profile around selected curve-axis. After appear "Tool Options dialog" You need select curve-axis. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SurfacePrism);
script: cmd("$SurfacePrism);

Swept 2 Guide
Tool options...

The Sweep Surfaces will be generated by the moving profile along 2 curve guides. After \"Tool Options dialog\" appears, you must select 2 curves: guide curve and curve profile. The new item will be created in VoxTree and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, number of faces, smoothing. Delete the corresponding VoxTree object to stop filling the curve

toolset: tools_tem("[extension]SurfaceSwept2);
script: cmd("$SurfaceSwept2);

Swept 2 Gener
Tool options...

The Sweep Surface will be generated by by moving of 2 profiles along the selected guide-curve. After appear "Tool Options dialog" You need select second guide and curve-profile. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SurfaceSwept2Gener);
script: cmd("$SurfaceSwept2Gener);

增加分辨率

增加当前对象的分辨率

toolset: tools_tem("[VOX_SCULPT_TOOL]IncRes);
script: cmd("$IncRes);

重采样

更改对象的分辨率

toolset: tools_tem("[VOX_SCULPT_TOOL]Resample);
script: cmd("$Resample);

清除

清除当前对象

toolset: tools_tem("[VOX_SCULPT_TOOL]Clear);
script: cmd("$Clear);

Base Clay

The basic brush for the voxel brushes. Duplicate, give the proper name and customize it.

toolset: tools_tem("[extension]BaseVoxBrush);
script: cmd("$BaseVoxBrush);

Wet Clay

This is similar to real clay. It consists of a clay effect and a little smudge.

toolset: tools_tem("[extension]WetClay);
script: cmd("$WetClay);

Extruder

The extrude of the voxels surface.

toolset: tools_tem("[extension]Extruder);
script: cmd("$Extruder);

Vox. Buildup

Constant buildup of the surface while the brush moves.

toolset: tools_tem("[extension]VoxBuildup);
script: cmd("$VoxBuildup);

Vox.粘土

扩张和平滑表面. 此选项用于增加光标下方的表面区域, 同时还会对其平滑

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_CLAY);
script: cmd("$SCULP_CLAY);

生长

向外扩张表面或向内收缩表面. 使用LMB可增加光标下方的表面区域. Brush的alpha通道不起作用, 不过笔刷的大小有用处. 使用CTRL键+LMB可收缩(塌缩)表面区域

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_GROW);
script: cmd("$SCULP_GROW);

填充

基于体素的填充工具. 此选项用于填充和柔化光标下方的表面中的空腔. 使用CTRL键+LMB可压平突起

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_FILL);
script: cmd("$SCULP_FILL);

切开

使用笔刷的alpha通道进行切开操作. 此工具使用笔刷的alpha通道来扩张区域. 使用'深度'滑块来调整雕刻的强度. 使用CTRL键可铲进表面, 使用SHIFT键可平滑表面

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_CARVE);
script: cmd("$SCULPT_CARVE);

Blob
Tool options...

toolset: tools_tem("[extension]Blob);
script: cmd("$Blob);

球体

绘制球体. 单击LMB可在3D空间中放置球体. 使用LMB绘制可生成跨屏幕平面的圆柱形体积

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_SPHERE);
script: cmd("$SCULP_SPHERE);

2D绘制

在平面上绘制. 此选项用于将2D平面提供为雕刻新体积的参照平面. LMB可使用当前笔刷绘制, '深度'滑块可调整厚度. 使用RMB可定义平面位置. (朝向将一直与屏幕视图平行.) 使用SHIFT键可独立于平面来平滑表面

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_BRANCH);
script: cmd("$SCULPT_BRANCH);

平面

此工具允许切除明确定义的面前方的一切. 使用RMB和工具选项可对齐平面. 此工具涉及矩形绘制. 使用CTRL键则会取反此动作, 填充平面之后的孔洞

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_RASPFILE);
script: cmd("$SCULPT_RASPFILE);

刮擦

压平表面. 这是基于体素的压平工具. 光标下方的区域会被压低进表面, 同时其也会被平滑

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_VXPLANE);
script: cmd("$SCULP_VXPLANE);

箍缩

箍缩表面. 此基于体素的箍缩工具用于绘制向光标中心靠近的表面特征. 按CTRL键+LMB可扩张表面

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_VXPINCH);
script: cmd("$SCULP_VXPINCH);