1. General
    2. In/Out
    3. Viewport
    4. Brushing
    5. 3D鼠標
    6. Theme
    7. Tools
    8. Beta
    1. VerTexture
    2. KitBash
    3. Modeling
    4. 繪制
    5. 渲染
    6. 重拓撲
    7. Simplest
    8. 編輯幾何體
    9. UV
    10. 雕刻
    1. 文件
    2. 編輯
    3. 視圖
    4. 紋理
    5. 對稱
    6. 圖層
    7. 凍結
    8. 隱藏
    9. 窗口
    10. 腳本
    11. 幫助
    12. 幾何體
    13. Mesh
    14. Bake
    15. Curves
    1. NavigationMenu
    2. CurvesMenu


Chinese English French German Japanese Korean Russian Spanish TRChinese Ukrainian


The modeling room is intended for the LOW-poly modeling. It is very similar to the Retopo room but the snapping to the surface is turned off by default. Start from the primitives tool, then continue with the SELECT tool to modify verts/edges/faces. Pay attention that tools list is very dependent on the current mode of selection - vertices, edges or faces.


添加幾何體
添加/拆分
通過點間的連線添加多邊形. 這種模式下, 您可添加新多邊形, 拆分面和邊緣, 還可連接頂點. 使用RMB可調整邊緣/頂點
toolset: tools_tem("[RetopoTool]TopToolAddPolygones);
script: cmd("$TopToolAddPolygones);
選取
在此模式下, 您可選取獨立頂點, 邊緣和面. 使用CTRL鍵將元素從所選中移除. 使用LMB選取元素, 然後可使用RMB移動(滑動)它們. 在'面'模式下, 可使用INSERT鍵細分面, 使用DEL鍵刪除. 在'邊緣'模式下, 可使用INSERT鍵拆分邊緣, 使用BKSP鍵塌縮邊緣, 使用DEL鍵移除邊緣, 可使用L鍵選取循環邊, 使用R鍵選取環形邊, 使用SHIFT鍵選取/高亮環形邊.
toolset: tools_tem("[RetopoTool]TopToolSelectAndOperate);
script: cmd("$TopToolSelectAndOperate);
選取路徑
選取路徑
toolset: tools_tem("[RetopoTool]SelPath);
script: cmd("$SelPath);
點/面
使用LMB添加點. 使用RMB調整點和添加面. (看預覽) 使用SHIFT鍵強制圍成三角形. 為更准確地放置四邊面可按住光標靠近可能四邊面的中心
toolset: tools_tem("{POINTPOLQDS}[RetopoTool]TopToolAddPoints);
script: cmd("$TopToolAddPoints);
四邊面
選取邊緣添加四邊面的條帶
toolset: tools_tem("{POINTPOLQDS}[RetopoTool]TopToolAddQuads);
script: cmd("$TopToolAddQuads);
3D Primitives
3D Primitives
toolset: tools_tem("{RTPPRIM}[extension]RTP_PRIM);
script: cmd("$RTP_PRIM);
2D Primitives
2D Primitives
toolset: tools_tem("{RTPPRIM}[extension]RTP_PRIM2);
script: cmd("$RTP_PRIM2);
R-Fill
Tool options...
This is a Quad Fill tool, designed to fill holes in a mesh with proper topological flow
toolset: tools_tem("{RTPFILL}[extension]RFill);
script: cmd("$RFill);
封口
封口工具 - 單擊可填充孔洞. 使用SHIFT鍵可封口帶有單個多邊形的孔洞而不是添加中心點
toolset: tools_tem("{RTPFILL}[RetopoTool]TopToolAddCaps);
script: cmd("$TopToolAddCaps);
Knife
Tool options...
Cut a face by Knife. Draw the line and press ENTER.
toolset: tools_tem("[extension]RtKnife);
script: cmd("$RtKnife);
Spine Tool
Tool options...
Extrude selected faces along Arc. Angle and Axis of the Arc can edit by Gizmo. You can edit Qty of Segment and Scale factor.
toolset: tools_tem("[extension]SpineTool);
script: cmd("$SpineTool);
Smart Extrude
Tool options...
Extrude face or edge along any direction.Also you can scale and rotate a selected faces or edges.
toolset: tools_tem("{EXTRD}[extension]RtExtrudeFreeSl);
script: cmd("$RtExtrudeFreeSl);
自由擠壓
在任何方向上擠壓. 請注意, 在您不關閉"自動對齊"功能的情況下新頂點將不會被自動對齊, 不過這些頂點會在進一步的操作中對齊
toolset: tools_tem("{EXTRD}[RetopoTool]sfExtrudeFree);
script: cmd("$sfExtrudeFree);
法線擠壓
沿著平均法線方向擠壓. 請注意, 在您不關閉"自動對齊"功能的情況下新頂點將不會被自動對齊, 不過這些頂點會在進一步的操作中對齊
toolset: tools_tem("{EXTRD}[RetopoTool]sfExtrudeNormal);
script: cmd("$sfExtrudeNormal);
擠壓面
擠壓面以便每個面都盡可能被移向同一方向. 請注意, 在某些情況下不可能實現完全平行的面位移, 不過3D-Coat會盡可能一樣的位移
toolset: tools_tem("{EXTRD}[RetopoTool]sfExtrudeFaces);
script: cmd("$sfExtrudeFaces);
擠壓頂點
擠壓面以便每個頂點都朝同一方向被位移
toolset: tools_tem("{EXTRD}[RetopoTool]sfExtrudeVerts);
script: cmd("$sfExtrudeVerts);
Free Moving
Tool options...
Moving selected faces/edges/vertices. By using mouse or Gizmo. If nothing is selected entire mesh will be transformed
toolset: tools_tem("{TRFM}[extension]RtFreeMoving);
script: cmd("$RtFreeMoving);
Free Rotating
Tool options...
Rotating selected faces/edges/vertices. By using mouse or Gizmo. If nothing is selected entire mesh will be transformed
toolset: tools_tem("{TRFM}[extension]RtFreeRotating);
script: cmd("$RtFreeRotating);
Free Scaling
Tool options...
Scaling selected faces/edges/vertices. By using mouse or Gizmo. If nothing is selected entire mesh will be transformed
toolset: tools_tem("{TRFM}[extension]RtFreeScaling);
script: cmd("$RtFreeScaling);
變換
變換所選面/頂點. 如果什麼都未選, 那整個面將被變換
toolset: tools_tem("{TRFM}[RetopoTool]sfTransform);
script: cmd("$sfTransform);
Surface Swept
Tool options...
Mesh generating by moving profile along selected curve-guide. The grid step frequency is regulated in 2 directions by U,V Spanse.
toolset: tools_tem("{SWEPTSURF}[extension]MdlSurfaceSwept);
script: cmd("$MdlSurfaceSwept);
Profile
Tool options...
Mesh generating by moving profile along selected curve-guide. The grid step frequency is regulated in 2 directions by U,V Spanse.
toolset: tools_tem("{SWEPTSURF}[extension]MdlProfileSurface);
script: cmd("$MdlProfileSurface);
Rotate Surface
Tool options...
The Rotate surface will be generated by revolution the selected profile around selected curve-axis. The grid step frequency is regulated in 2 directions by U,V Spanse.
toolset: tools_tem("{ROTATESRF}[extension]MdlSurfaceRotate);
script: cmd("$MdlSurfaceRotate);
Polyhedron
Tool options...
The Polyhedron will be generated by revolution and moving the selected profile around selected curve-axis. The grid step frequency is regulated in 2 directions by U,V Spanse.
toolset: tools_tem("{ROTATESRF}[extension]MdlSurfacePrism);
script: cmd("$MdlSurfacePrism);
Surface by two view
Tool options...
The Mesh generating by moving two conic along curve-guide. You can edit curve.
toolset: tools_tem("{CONICSRF}[extension]MdlShapeSurface);
script: cmd("$MdlShapeSurface);
Surface by two view
The Mesh generating by moving two Conic along curve-guide. You can edit curve-guide and Conic by Parameter.
toolset: tools_tem("{CONICSRF}[extension]MdlCinematicSurface);
script: cmd("$MdlCinematicSurface);
Surface Swept 2
Tool options...
>Mesh generating by moving profile along two selected curve-guide. The grid step frequency is regulated in 2 directions by U,V Spanse.
toolset: tools_tem("[extension]MdlSurfaceSwept2);
script: cmd("$MdlSurfaceSwept2);
Loft Surface
Tool options...
Loft Surfaces are surfaces generated by multiple Curves creating a smooth tangency between the selected curves. Mesh generating by moving across selected curve-section. The grid step frequency is regulated in 2 directions by U,V Spanse.
toolset: tools_tem("[extension]MdlSurfaceLofte);
script: cmd("$MdlSurfaceLofte);
Swept N Gener
Tool options...
The Sweep Surfaces will be generated by by moving N profiles along two curve-guide. After appear Tool Options dialog You need select second guide and curve-profiles. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.
toolset: tools_tem("[extension]MdlSurfaceNGenerTwoGuide);
script: cmd("$MdlSurfaceNGenerTwoGuide);


編輯幾何體
筆刷
此工具的工作方式與軟選擇相似. 最接近筆刷光標中心的頂點要比處於外邊緣處的頂點移動的多. 使用SHIFT鍵可平滑頂點間隔
toolset: tools_tem("[RetopoTool]TopToolTweakWithBrush);
script: cmd("$TopToolTweakWithBrush);
刪除多邊形
點擊可刪除多邊形. 使用CTRL鍵可刪除相連的多組多邊形
toolset: tools_tem("[RetopoTool]TopToolDeletePolygones);
script: cmd("$TopToolDeletePolygones);
刪除邊緣
刪除邊緣, 環形邊, 或循環邊. 使用CTRL鍵可快速選取循環邊
toolset: tools_tem("[RetopoTool]TopToolDeleteEdges);
script: cmd("$TopToolDeleteEdges);
塌縮
在邊緣上使用LMB可塌縮邊緣. 使用CTRL鍵+LMB可塌縮環形邊
toolset: tools_tem("[RetopoTool]TopToolCollapseEdges);
script: cmd("$TopToolCollapseEdges);
拆分環
使用線拆分環形邊
toolset: tools_tem("[RetopoTool]TopToolSplitEdges);
script: cmd("$TopToolSplitEdges);
移動
調整頂點, 邊緣和面
toolset: tools_tem("[RetopoTool]TopToolTweakVerts);
script: cmd("$TopToolTweakVerts);
滑動邊緣
使用LMB可滑動邊緣. 使用CTRL鍵+LMB將滑動循環邊
toolset: tools_tem("[RetopoTool]TopToolSlideEdges);
script: cmd("$TopToolSlideEdges);


UV
標記接縫
在UV貼圖上標記接縫. 使用CTRL鍵+LMB可去標記接縫
toolset: tools_tem("[RetopoTool]TopToolMarkSeams);
script: cmd("$TopToolMarkSeams);
循環邊
在UV貼圖上標記整個循環邊. 使用CTRL鍵+LMB可去標記這些循環邊
toolset: tools_tem("[RetopoTool]TopToolMarkEdgeLoops);
script: cmd("$TopToolMarkEdgeLoops);


Special
清除
清除網格上的所有繪制線
toolset: tools_tem("[RetopoTool]ClearLines);
script: cmd("$ClearLines);
平滑
平滑網格上所有繪制線
toolset: tools_tem("[RetopoTool]SmoothLines);
script: cmd("$SmoothLines);
The next commands are available only if UV - vertex manupulation commands activated.


所選
清除
清除所選部分
toolset: tools_tem("[RetopoTool]ClearSel);
script: cmd("$ClearSel);
取反
取反所選元素
toolset: tools_tem("[RetopoTool]uvInvSel);
script: cmd("$uvInvSel);
順時針旋轉
順時針旋轉
toolset: tools_tem("[RetopoTool]RotateCW);
script: cmd("$RotateCW);
逆時針旋轉
逆時針旋轉
toolset: tools_tem("[RetopoTool]RotateCCW);
script: cmd("$RotateCCW);
翻轉U
水平翻轉所選面
toolset: tools_tem("[RetopoTool]FlipU);
script: cmd("$FlipU);
翻轉V
垂直翻轉所選面
toolset: tools_tem("[RetopoTool]FlipV);
script: cmd("$FlipV);
松弛
松弛所選頂點 (UV預覽窗口中)
toolset: tools_tem("[RetopoTool]uvRelax);
script: cmd("$uvRelax);
The next commands are available only if UV - edges manupulation commands activated.
布料松弛
松弛UV孤島以便接縫上相反的邊緣可在空間中的邊緣長度和UV空間中的邊緣長度間獲得大致一樣的長度和一樣的關系. 這可用於制作真實事物 - 布料和毛絨玩具
toolset: tools_tem("[RetopoTool]Relax2);
script: cmd("$Relax2);
線
沿線放置所選邊緣
toolset: tools_tem("[RetopoTool]uvToLine);
script: cmd("$uvToLine);
等距
沿線放置所選邊緣並將點間設置等間距
toolset: tools_tem("[RetopoTool]uvEquidist);
script: cmd("$uvEquidist);
水平
沿水平線放置邊緣
toolset: tools_tem("[RetopoTool]uvHorizontal);
script: cmd("$uvHorizontal);
垂直
沿垂直線放置邊緣
toolset: tools_tem("[RetopoTool]uvVertical);
script: cmd("$uvVertical);
循環邊
選取循環邊 (UV預覽窗口中)
toolset: tools_tem("[RetopoTool]uvLoop);
script: cmd("$uvLoop);
環形邊
選取環形邊 (UV預覽窗口中)
toolset: tools_tem("[RetopoTool]uvRing);
script: cmd("$uvRing);
設置接縫
將所選邊緣標記為接縫 (UV預覽窗口中)
toolset: tools_tem("[RetopoTool]uvSeams);
script: cmd("$uvSeams);
The next commands are available only if UV - faces manupulation commands activated.
刪除接縫
刪除所選邊緣上的接縫 (UV預覽窗口中)
toolset: tools_tem("[RetopoTool]uvClrSeams);
script: cmd("$uvClrSeams);
松弛
松弛面可減少方塊廢物. 但是您應知道減少方塊廢物會導致附加拉伸, 因此您應選擇最適合自己的 - 方塊廢物或拉伸
toolset: tools_tem("[RetopoTool]Strict);
script: cmd("$Strict);
隱藏
隱藏所選面
toolset: tools_tem("[RetopoTool]uvHide);
script: cmd("$uvHide);
取反隱藏
取反隱藏面
toolset: tools_tem("[RetopoTool]uvInvHide);
script: cmd("$uvInvHide);
顯現
顯示(顯現)所選面
toolset: tools_tem("[RetopoTool]uvUnhide);
script: cmd("$uvUnhide);
全部顯現
顯現所有隱藏面
toolset: tools_tem("[RetopoTool]uvUnhideAll);
script: cmd("$uvUnhideAll);
HD擴張
擴張隱藏區域
toolset: tools_tem("[RetopoTool]hdExpand);
script: cmd("$hdExpand);
The next commands are available only if UV - islands manupulation commands activated.
HD收縮
收縮隱藏區域
toolset: tools_tem("[RetopoTool]hdContract);
script: cmd("$hdContract);
ABF
使用ABF++以實現展開所選孤島
toolset: tools_tem("[RetopoTool]toABF);
script: cmd("$toABF);
GU(全局統一)
使用3D-Coat專屬全局統一UV展開方法展開所選孤島
toolset: tools_tem("[RetopoTool]toGU);
script: cmd("$toGU);
LSCM
使用LSCM以實現展開所選孤島
toolset: tools_tem("[RetopoTool]toLSCM);
script: cmd("$toLSCM);
平面
使用平面投影以實現展開所選孤島
toolset: tools_tem("[RetopoTool]toPlanar);
script: cmd("$toPlanar);
複制UV
將孤島複制到剪貼板 (使用CTRL+C組合鍵). 您可以選取其它孤島將其粘貼在此. 以這種方式您就可以在其它孤島上精確放置某一孤島了
toolset: tools_tem("[RetopoTool]CopyUV);
script: cmd("$CopyUV);
The next commands are available only if the select/edges tool activated.
擴張
擴張所選元素區域
toolset: tools_tem("[RetopoTool]sfExpand);
script: cmd("$sfExpand);
收縮
Contract the area of selected elements
toolset: tools_tem("[RetopoTool]sfContract);
script: cmd("$sfContract);
切割邊緣
按等份切割邊緣. 輸入每個邊緣的分割量
toolset: tools_tem("[RetopoTool]sfCutEdges);
script: cmd("$sfCutEdges);
對齊
將重拓撲網格的頂點對齊表面. 如果您更改了場景中對象的狀態且要重新對齊重拓撲網格, 那就可以使用此功能. 如果您正在頂點模式下使用"選取"工具, 那麼就只會影響所選的頂點
toolset: tools_tem("[RetopoTool]SnapRT);
script: cmd("$SnapRT);
縮放
縮放所選部分或整個網格. 每個連接的簇都將被單獨變換
toolset: tools_tem("[RetopoTool]ScaleCL);
script: cmd("$ScaleCL);
松弛
松弛整個重拓撲網格或子集. 如果您正在頂點模式下使用"選取"工具, 那麼就只會影響所選的頂點
toolset: tools_tem("[RetopoTool]ApplyTSm);
script: cmd("$ApplyTSm);
順時針旋轉
順時針旋轉所選邊緣
toolset: tools_tem("[RetopoTool]seSpin);
script: cmd("$seSpin);
逆時針旋轉
逆時針旋轉所選邊緣
toolset: tools_tem("[RetopoTool]seSpinBack);
script: cmd("$seSpinBack);
擠壓
擠壓所選邊緣
toolset: tools_tem("[RetopoTool]seExtrude);
script: cmd("$seExtrude);
拆分
選取多個邊緣, 然後點擊[拆分]. 將鼠標移到邊緣上來指定拆分位置, 然後點擊拆分. 您可以使用INSERT鍵觸發此工具, 然後拆分所選邊緣.
toolset: tools_tem("[RetopoTool]seSplit);
script: cmd("$seSplit);
塌縮
使用BKSP鍵可塌縮所選邊緣
toolset: tools_tem("[RetopoTool]seCollapse);
script: cmd("$seCollapse);
刪除
使用DELETE鍵可刪除所選邊緣
toolset: tools_tem("[RetopoTool]seDelete);
script: cmd("$seDelete);
循環邊
按L鍵可選取循環邊. 在同一循環邊上選取兩個邊緣可限制這種效果
toolset: tools_tem("[RetopoTool]seEdgeLoop);
script: cmd("$seEdgeLoop);
環形邊
按R鍵可選取環形邊. 在同一環形邊上選取兩個邊緣可限制這種效果
toolset: tools_tem("[RetopoTool]seEdgeRing);
script: cmd("$seEdgeRing);
選取形狀
選取銳利邊緣
toolset: tools_tem("[RetopoTool]seSelSharp);
script: cmd("$seSelSharp);
傾斜
傾斜所選邊緣
toolset: tools_tem("[RetopoTool]seBevel);
script: cmd("$seBevel);
Split Edge
Split the selected Edges.
toolset: tools_tem("[RetopoTool]rtSpliteEdge);
script: cmd("$rtSpliteEdge);
Bridge
By selecting two edges you can create a face
toolset: tools_tem("[RetopoTool]rtBridge);
script: cmd("$rtBridge);
存儲所選
存儲所選
toolset: tools_tem("[RetopoTool]rtStoreSel);
script: cmd("$rtStoreSel);
加載所選.
加載所選.
toolset: tools_tem("[RetopoTool]rtRecallSel);
script: cmd("$rtRecallSel);
The next commands are available only if the select/vertex tool activated.
清除所選
清除所選
toolset: tools_tem("[RetopoTool]rtClearSel);
script: cmd("$rtClearSel);
連接
連接所選頂點
toolset: tools_tem("[RetopoTool]sfConnect);
script: cmd("$sfConnect);
Bevel Vertex
Tool options...
Bevels the selected vertex/vertices individually, rather than as a group
toolset: tools_tem("[extension]RtBevelVertex);
script: cmd("$RtBevelVertex);
Weld Vertices
Tool options...
Welds selected Vertices within a pre-determined range in distance (in pixels). Colored Preview lines connecting vertices indicate which ones will be welded together. As you expand the radius these preview connection lines will grow in number. Decreasing the tolerance radius will reduce the number.
toolset: tools_tem("[extension]RtWeldingVertexs);
script: cmd("$RtWeldingVertexs);
The next commands are available only if the select/faces tool activated.
Align Vertices
Tool options...
Alignment Vertexs by Plane.
toolset: tools_tem("[extension]RtAlignmentVertexs);
script: cmd("$RtAlignmentVertexs);
硬擠
硬擠所選面
toolset: tools_tem("[RetopoTool]sfIntrude);
script: cmd("$sfIntrude);
殼層
為所選面制作殼層
toolset: tools_tem("[RetopoTool]sfShell);
script: cmd("$sfShell);
刪除
刪除所選面
toolset: tools_tem("[RetopoTool]sfDelete);
script: cmd("$sfDelete);
克隆
克隆所選面. 變換新網格塊並按ENTER鍵確認
toolset: tools_tem("[RetopoTool]sfClone);
script: cmd("$sfClone);
分離
將所選面克隆到新組. 分離的面簇的邊界將被從相鄰的面拆分開, 以便您可以獨立轉換簇
toolset: tools_tem("[RetopoTool]sfCutnClone);
script: cmd("$sfCutnClone);
細分
使用INSERT鍵可細分所選面
toolset: tools_tem("[RetopoTool]sfSubdiv);
script: cmd("$sfSubdiv);
隱藏
隱藏所選面
toolset: tools_tem("[RetopoTool]sfHide);
script: cmd("$sfHide);
翻轉面
翻轉所選面的法線. 要小心! 翻轉與其它面相鄰的面可能會導致出現非流形表面以及面的消除
toolset: tools_tem("[RetopoTool]rtFlipFaces);
script: cmd("$rtFlipFaces);
取反隱藏
取反所有面的隱藏狀態
toolset: tools_tem("[RetopoTool]sfInvHidden);
script: cmd("$sfInvHidden);
顯現
顯現所有面
toolset: tools_tem("[RetopoTool]sfUnhide);
script: cmd("$sfUnhide);
Poke Face
Poke of the selected Face.
toolset: tools_tem("[RetopoTool]rtPoke);
script: cmd("$rtPoke);
InSet
Add polygons to Selected poligons.
toolset: tools_tem("[RetopoTool]InSet);
script: cmd("$InSet);


整個網格
導入
導入重拓撲網格
toolset: tools_tem("[RetopoTool]ImportRM);
script: cmd("$ImportRM);
導出
導出重拓撲網格
toolset: tools_tem("[RetopoTool]ExportRM);
script: cmd("$ExportRM);
細分
細分重拓撲網格
toolset: tools_tem("[RetopoTool]ApplyTS);
script: cmd("$ApplyTS);
Smooth Selection CC
Subdivide and smooth selected faces using the Catmull-Clark algorithm.
toolset: tools_tem("[RetopoTool]sfSmooth);
script: cmd("$sfSmooth);
清除
清除重拓撲網格
toolset: tools_tem("[RetopoTool]ClearTM);
script: cmd("$ClearTM);
對稱
為網格應用對稱
toolset: tools_tem("[RetopoTool]ApplyTSym);
script: cmd("$ApplyTSym);
展開
將所有孤島都貼合映射到UV貼圖上
toolset: tools_tem("[RetopoTool]Unwrap);
script: cmd("$Unwrap);


命令
保存輪廓
此命令允許以實際比例將輪廓另存為用於進一步激光切割的EPS或DXF. 線的長度對應幾何長度. 這對於您要使用激光切割機切割形狀同時又要粘合部分是很有幫助的
toolset: tools_tem("[RetopoTool]rLazerCut);
script: cmd("$rLazerCut);