3DCoat 2021文檔

構成

通過局部對象選擇轉置對象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_TRANSPOSE);
script: cmd("$SCULPT_TRANSPOSE);

移動

移動表面區域. 按下並拖動LMB可相對於屏幕視圖移動光標內的表面. 使用CTRL鍵可沿法線移動表面. 不同的Alpha通道會產生不同的結果

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_MOVE);
script: cmd("$SCULP_MOVE);

變換

將對象作為整體進行變換. 在對象上點擊可進行變換

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_TRANSFORM);
script: cmd("$SCULPT_TRANSFORM);

基本體
Tool options...

在圓內部拖動鼠標可在屏幕空間移動對象. 按鍵'X', 'Y', 'Z'可約束運動. 按SHIFT鍵, CTRL鍵, SHIFT+CTRL組合鍵移動方向箭頭和齒輪可進行離散運動和旋轉

toolset: tools_tem("[extension]SCULP_PRIM);
script: cmd("$SCULP_PRIM);

導入

將對象導入進場景. 按ENTER鍵可應用所選對象. 在沒有半自交點的情況下對象應是封閉的. 使用筆刷/移動/旋轉/縮放這幾種模式可放置對象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_MERGE);
script: cmd("$SCULP_MERGE);

曲線
Tool options...

使用曲線(樣條)繪制. 使用LMB添加點, 使用RMB調整大小, 使用BKSP鍵刪除最後那個點. 按ENTER鍵可繪制曲線, 然後按ESC鍵可刪除該曲線. 在球體上使用CTRL鍵+LMB可連接點

toolset: tools_tem("[extension]SCULP_CURVES);
script: cmd("$SCULP_CURVES);

文本
Tool options...

在體積上繪制文本

toolset: tools_tem("[extension]SCULP_TEXT);
script: cmd("$SCULP_TEXT);

Logo

使用此工具將任意抗鋸齒的黑白圖像轉換為3D對象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_LOGO);
script: cmd("$SCULPT_LOGO);

蛇形

繪制'蛇形'. 使用LMB就可借助此工具進行繪制. 如有可能, 蛇形會趨向與相鄰的表面連接. 在描邊的末端按下LMB可平滑樣條, 直到其被釋放. 使用滑塊調節平滑速度. 可從有效的管道外形中選取蛇形形狀

toolset: tools_tem("{Snake}[extension]SCULP_SPSTROKE);
script: cmd("$SCULP_SPSTROKE);

毛刺

繪制毛刺. 使用LMB就可借助此工具進行繪制. 毛刺會獨立於相鄰的表面存在, 其前端將逐漸變成點. 在描邊的末端按下LMB可平滑樣條, 直到其被釋放. 使用滑塊調節平滑速度. 可從有效的管道外形中選取毛刺形狀

toolset: tools_tem("{Snake}[extension]SCULP_FREESP);
script: cmd("$SCULP_FREESP);

切除
Tool options...

切除

toolset: tools_tem("[extension]CutOff);
script: cmd("$CutOff);

Measure
Tool options...

Click to add points. Use SHIFT to align lines horizontally, vertically or diagonally. Press ESC to stop measure guide creation. New click will start new guide. Click on lines and points to split lines or drag points. Measure guides may be used in other tools as visual markers or snapping guides.
Doubleclick to erase point. Move nearby points together to erase captured point. Use CTRL to avoid snapping to existing points or lines, for example when you need to start new line from existing point or line.

點擊可添加點. 使用SHIFT鍵可水平, 垂直或對角對齊線. 按ESC鍵可停止測量輔助線的創建. 點擊"新建"將啟用新的輔助線. 在線上和點上點擊可拆分線或拖動點. 測量輔助線可被作為可視標記或對齊輔助線用在其它工具中.
雙擊可擦除點. 同時移動附近的點可擦除捕捉到的點. 使用CTRL鍵可避免對齊已有點或線, 例如您需要從已有點或線啟用新線的情況.

toolset: tools_tem("[extension]Measure);
script: cmd("$Measure);

Noise

toolset: tools_tem("[extension]Noise);
script: cmd("$Noise);

軸向
Tool options...

Create a Radial Array. Any Voxel Layer can be duplicated and rotated in number and angle from a central axis

toolset: tools_tem("[extension]SCULPT_AXIAL);
script: cmd("$SCULPT_AXIAL);

增加分辨率

增加當前對象的分辨率

toolset: tools_tem("[VOX_SCULPT_TOOL]IncRes);
script: cmd("$IncRes);

重采樣

更改對象的分辨率

toolset: tools_tem("[VOX_SCULPT_TOOL]Resample);
script: cmd("$Resample);

清除

清除當前對象

toolset: tools_tem("[VOX_SCULPT_TOOL]Clear);
script: cmd("$Clear);

塗層
Tool options...

此工具允許以無損方式在圖層之上添加塗層. 這類似於體素圖層, 不過您可使用曲線定義區域, 之後更改拐角點.

toolset: tools_tem("[extension]CurvesLayer);
script: cmd("$CurvesLayer);

Tube/Array
Tool options...

Tube/Array

toolset: tools_tem("[extension]TubeOnCurve);
script: cmd("$TubeOnCurve);

Bend Volume
Tool options...

Bend the object around the curve.

toolset: tools_tem("[extension]BendVolume);
script: cmd("$BendVolume);

Swep along Guide
Tool options...

The swept surface will be generated by moving profile along selected curve-guide. After appear Tool Options dialog You need select profile-curve. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, angle, twist-angle, etc. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SweptSurface);
script: cmd("$SweptSurface);

Rotate Surface
Tool options...

The Rotate surface will be generated by revolution the selected profile around selected curve-axis. After appear "Tool Options dialog" You need select curve-axis. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Angle, TwistAngle, etc. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]RotateSurface);
script: cmd("$RotateSurface);

Polyhedron
Tool options...

The Polyhedron will be generated by revolution ang moving the selected profile around selected curve-axis. After appear "Tool Options dialog" You need select curve-axis. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SurfacePrism);
script: cmd("$SurfacePrism);

Swept 2 Guide
Tool options...

The Sweep Surfaces will be generated by the moving profile along 2 curve guides. After \"Tool Options dialog\" appears, you must select 2 curves: guide curve and curve profile. The new item will be created in VoxTree and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, number of faces, smoothing. Delete the corresponding VoxTree object to stop filling the curve

toolset: tools_tem("[extension]SurfaceSwept2);
script: cmd("$SurfaceSwept2);

Swept 2 Gener
Tool options...

The Sweep Surface will be generated by by moving of 2 profiles along the selected guide-curve. After appear "Tool Options dialog" You need select second guide and curve-profile. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SurfaceSwept2Gener);
script: cmd("$SurfaceSwept2Gener);

構造器
Tool options...

Simplifies the 3D modeling process for PixelArt using basic geometric shapes as bricks

toolset: tools_tem("[extension]PixelArt);
script: cmd("$PixelArt);

素描
Tool options...

從對象的2個或3個投影創建體積對象

toolset: tools_tem("[extension]SCULP_SKETCH);
script: cmd("$SCULP_SKETCH);

肌肉

肌肉工具. 觸筆壓力和深度強度決定了肌肉的厚度. 您可關閉"壓力取決於半徑"選項來獲取更精確的結果

toolset: tools_tem("[extension]SCULP_MUSCLE);
script: cmd("$SCULP_MUSCLE);

變彎
Tool options...

繞圓變彎(彎曲)對象

toolset: tools_tem("[extension]SCULP_WRAP);
script: cmd("$SCULP_WRAP);

全部平滑

平滑(松弛)當前對象

toolset: tools_tem("[VOX_SCULPT_TOOL]SmAll);
script: cmd("$SmAll);