3DCoat 2021文檔

黏土

壓平表面並使用alpha通道, 模版和智能材質對其擠壓

toolset: tools_tem("[extension]SCULP_SCLAY);
script: cmd("$SCULP_SCLAY);

繪制

使用LMB可突起光標下方的區域. 使用CTRL鍵+LMB可內縮表面, 使用SHIFT鍵+LMB可平滑幾何體

toolset: tools_tem("[extension]SCULPT_DRAW);
script: cmd("$SCULPT_DRAW);

壓平

此模式用於通過將點突起到或下沉到共同平面來壓平光標下方的表面. 高度和角度是直接求自光標中心下方點的平均值, 擴張此效果便可填充整個光標區域

toolset: tools_tem("{FLT}[extension]SCULP_PLANE);
script: cmd("$SCULP_PLANE);

刻

其作用效果相當於刮擦, 不過會輕微鑽進表面. 這對於創建銳利邊緣非常方便. CTRL鍵用於相反動作

toolset: tools_tem("{FLT}[extension]SCULP_PLANE2);
script: cmd("$SCULP_PLANE2);

Flat Polish

Flat Polish

toolset: tools_tem("{FLT}[extension]FlatPolish);
script: cmd("$FlatPolish);

Trim adaptive

Trim adaptive

toolset: tools_tem("{FLT}[extension]trim_adaptive);
script: cmd("$trim_adaptive);

填充

填充空腔. 使用CTRL鍵可取反該動作 - 可消除"浮雕"

toolset: tools_tem("{FILL}[extension]SCULP_SFILL);
script: cmd("$SCULP_SFILL);

琵琶

此工具允許填充空腔, 就好似您正在彈琵琶一樣. 開始用低壓力填充, 結束用較大壓力就可獲取精確結果. 將此工具與平滑操作結合可獲得完美結果

toolset: tools_tem("{FILL}[extension]SCULP_SFILL2);
script: cmd("$SCULP_SFILL2);

構建

像"粘土"工具一樣的表現, 不過能無限制的構建表面 (與粘土一樣不止一個圖層)

toolset: tools_tem("[extension]BUILDUP);
script: cmd("$BUILDUP);

擠壓

擠壓表面

toolset: tools_tem("[extension]SCULP_SFEXTRUDE0);
script: cmd("$SCULP_SFEXTRUDE0);

擴張

沿著頂點法線方向擠壓表面

toolset: tools_tem("[extension]SCULP_INFLATE);
script: cmd("$SCULP_INFLATE);

絕對

絕對擠壓 - 相對於初始表面形狀

toolset: tools_tem("[extension]SCULP_SFEXTRUDEA);
script: cmd("$SCULP_SFEXTRUDEA);

快速

對於快速形狀生成是非常快的

toolset: tools_tem("{RAPID}[extension]SCULPT_RAPID);
script: cmd("$SCULPT_RAPID);

快速2

快速工具的光滑版本

toolset: tools_tem("{RAPID}[extension]RAPID2);
script: cmd("$RAPID2);

劃痕

沿著描邊繪制劃痕. 劃痕會像粘土那樣消退已有幾何體

toolset: tools_tem("{RAPID}[extension]SCULPT_CLAWS);
script: cmd("$SCULPT_CLAWS);

泥漿

繪制噪聲粘土條帶

toolset: tools_tem("{RAPID}[extension]SCULPT_MUD);
script: cmd("$SCULPT_MUD);

箍縮

箍縮. 此選項用於繪制靠近光標的徑向中心的表面區域. 使用CTRL鍵可使表面從光標中心向外擴張

toolset: tools_tem("{PINCH}[extension]SCULPT_PINCH);
script: cmd("$SCULPT_PINCH);

Roof Pinch

The "Roof pinch" tries to pinch the surface toward to line picked smartly. The diffetence with Smart pinch is that this tool keeps the surface noise instead of flattening. The tool picks two points - one on the left and one on the right side of the brush. Then it builds 2 planes from that points and pinches the surface to the planes intersection.

toolset: tools_tem("{PINCH}[extension]RoofPinch);
script: cmd("$RoofPinch);

Smart Pinch

Smart Pinch tries to pinch the surface toward to line picked, smartly. The tool picks two points - one on the left and one on the right side of the brush. Then it builds 2 planes from those points and snaps surface to the closest plane. Also it adds a little pinch to underestimate the sharpness of the angle.

toolset: tools_tem("{PINCH}[extension]SmartPinch);
script: cmd("$SmartPinch);

平移

此模式用於沿相對於屏幕空間的描邊運動滑動幾何點

toolset: tools_tem("[extension]SCULP_FOLLOW);
script: cmd("$SCULP_FOLLOW);

Smooth

Smooth the surface

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_SMOOTH1);
script: cmd("$SCULPT_SMOOTH1);

平滑

平滑表面

toolset: tools_tem("{RELAX}[VOX_SCULPT_TOOL]SCULPT_SMOOTH);
script: cmd("$SCULPT_SMOOTH);

Super Relax

This is a powerful, valence-independent relax brush. It converts surface to the regular grid, relaxes, then bakes it back.

toolset: tools_tem("{RELAX}[extension]SuperRelax);
script: cmd("$SuperRelax);

Smooth Convex

Smooth Convex

toolset: tools_tem("{RELAX}[extension]smooth_convex);
script: cmd("$smooth_convex);

Smooth Concave

Smooth Concave

toolset: tools_tem("{RELAX}[extension]smooth_concave);
script: cmd("$smooth_concave);

Tangent

Tangent

toolset: tools_tem("{RELAX}[extension]TangentRelax);
script: cmd("$TangentRelax);

Sharpen

toolset: tools_tem("[extension]Sharpen);
script: cmd("$Sharpen);

凍結

凍結表面的某些部分. 使用CTRL鍵+D可清除凍結部分, 使用CTRL+SHIFT+I組合鍵可取反凍結

toolset: tools_tem("{MASK}[VOX_SCULPT_TOOL]SCULP_SFREEZE);
script: cmd("$SCULP_SFREEZE);

表面隱藏

Brush or use Stroke Draw mode to hide portions of the selected VoxTree object. To unhide, chose that option from the Geometry Menu.

toolset: tools_tem("{MASK}[VOX_SCULPT_TOOL]SurfHide);
script: cmd("$SurfHide);

蛇形粘土

蛇形粘土

toolset: tools_tem("[extension]SnakeClay);
script: cmd("$SnakeClay);

Magnify SL
Tool options...

Magnify SL_Magnify Depth stored in the selected Sculpt Layer. CTRL will reduce depth

toolset: tools_tem("[extension]MagnifyLayers);
script: cmd("$MagnifyLayers);

快速拾取

拾取當前雕刻對象. 在對象上點擊可選取當前對象. 其它方法 - 在任何其它工具中使用'H'快捷鍵可拾取當前對象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_PICK);
script: cmd("$SCULPT_PICK);

構成

通過局部對象選擇轉置對象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_TRANSPOSE);
script: cmd("$SCULPT_TRANSPOSE);

移動

移動表面區域. 按下並拖動LMB可相對於屏幕視圖移動光標內的表面. 使用CTRL鍵可沿法線移動表面. 不同的Alpha通道會產生不同的結果

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_MOVE);
script: cmd("$SCULP_MOVE);

變換

將對象作為整體進行變換. 在對象上點擊可進行變換

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_TRANSFORM);
script: cmd("$SCULPT_TRANSFORM);

實例

此工具將用於制作實例. 實例是已有對象的引用, 因此它們幾乎不占用內存. 如果您使用的某一元素可在單獨的體積中被多次使用, 那您就可以將其用作實例. 例如, 它可以是磚塊或某個機械零件. 您可以創建鏡像實例, 例如左右手臂

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_INST);
script: cmd("$SCULP_INST);

Base brush

Press RMB and duplicate this brush to create the new brush.

toolset: tools_tem("[extension]BaseBrush);
script: cmd("$BaseBrush);

切除
Tool options...

切除

toolset: tools_tem("[extension]CutOff);
script: cmd("$CutOff);

Noise

toolset: tools_tem("[extension]Noise);
script: cmd("$Noise);

封閉孔洞

封閉孔洞

toolset: tools_tem("{HEAL}[extension]CloseHole);
script: cmd("$CloseHole);

Reconstruct
Tool options...

Reconstructs Mesh locally, beneath the brush; generally to repair flaws in the mesh.

toolset: tools_tem("{HEAL}[extension]Reconstruct);
script: cmd("$Reconstruct);

MeshDoctor
Tool options...

toolset: tools_tem("{HEAL}[extension]MeshDoctor);
script: cmd("$MeshDoctor);

清理粘土
Tool options...

清理粘土

toolset: tools_tem("{HEAL}[extension]CleanClay);
script: cmd("$CleanClay);

填充孔洞
Tool options...

填充網格中的孔洞, 通過此選項可采用周圍網格的輪廓

toolset: tools_tem("[extension]FillHoles);
script: cmd("$FillHoles);

多邊形移除
Tool options...

在您的雕刻上用遮罩繪制某個區域來完全刪除遮蔽區域中的受影響多邊形

toolset: tools_tem("[extension]PaintHole);
script: cmd("$PaintHole);

變角器
Tool options...

此工具允許在所選區域內創建銳利區域. 使用凍結工具選取區域, 然後按"應用"按鈕. 區域內的表面將在所選部分邊緣處被近似為延長(外推)表面方向

toolset: tools_tem("[extension]SuperPinch);
script: cmd("$SuperPinch);

平滑器
Tool options...

此工具的作用就好似您正在對所選區域進行無數次平滑操作. 就連大的細節您可使用此工具對其溶解. 使用"保留表面"選項可平滑細節, 不過會保留整體表面流向 (在有可能時)

toolset: tools_tem("[extension]InfSmooth);
script: cmd("$InfSmooth);

Subdivide
Tool options...

Subdivide surface with Loop subdivision method. Select area to subdivide and use Tool Options

toolset: tools_tem("[extension]Subdivide);
script: cmd("$Subdivide);

Measure
Tool options...

Click to add points. Use SHIFT to align lines horizontally, vertically or diagonally. Press ESC to stop measure guide creation. New click will start new guide. Click on lines and points to split lines or drag points. Measure guides may be used in other tools as visual markers or snapping guides.
Doubleclick to erase point. Move nearby points together to erase captured point. Use CTRL to avoid snapping to existing points or lines, for example when you need to start new line from existing point or line.

點擊可添加點. 使用SHIFT鍵可水平, 垂直或對角對齊線. 按ESC鍵可停止測量輔助線的創建. 點擊"新建"將啟用新的輔助線. 在線上和點上點擊可拆分線或拖動點. 測量輔助線可被作為可視標記或對齊輔助線用在其它工具中.
雙擊可擦除點. 同時移動附近的點可擦除捕捉到的點. 使用CTRL鍵可避免對齊已有點或線, 例如您需要從已有點或線啟用新線的情況.

toolset: tools_tem("[extension]Measure);
script: cmd("$Measure);

3D Print Supports
Tool options...

This is a Supports Creation Tool specific to 3D Printing, wherin extended portions of a model need support elements to deliver a proper printing result

toolset: tools_tem("[extension]Supports);
script: cmd("$Supports);

體素光線
Tool options...

This tool allows the model to be visualized in realtime, with an interactive slicing plane

toolset: tools_tem("[extension]VoXRay);
script: cmd("$VoXRay);

Extrude Faces
Tool options...

Extrude Faces

toolset: tools_tem("[extension]ExtrudeFaces);
script: cmd("$ExtrudeFaces);

Bridge
Tool options...

toolset: tools_tem("[extension]Bridge);
script: cmd("$Bridge);

淺浮雕

創建淺浮雕. 此工具用於在平面的一邊制作"半高"細節, 之後在特殊方向上擠壓這些細節. 當系數被設為高於或低於1時, 工具的箭頭端就會出現定向逐漸減少或壓扁. 而工具的球形端始終將形態的外形高點擠壓向球的位置和方向

toolset: tools_tem("[extension]SCULPT_BARELIEF);
script: cmd("$SCULPT_BARELIEF);

貼合
Tool options...

將某一對象貼合其它對象. 您可標記對應的特征並將對象放置在一起. 在做完近似放置之後, 您就可進行精確放置了, 對應的特征將彼此縫合

toolset: tools_tem("[extension]FitTool);
script: cmd("$FitTool);

Reproject
Tool options...

Allows the user to reproject the details and vertex paint from one or more meshes in the scene, to another mesh. Either to the entire mesh or locally using a brush

toolset: tools_tem("[extension]Reproject);
script: cmd("$Reproject);

Bend

Bend the object around the axis

toolset: tools_tem("[extension]SCULP_BEND);
script: cmd("$SCULP_BEND);

Twist

Twist the object

toolset: tools_tem("[extension]SCULP_TWIST);
script: cmd("$SCULP_TWIST);

變彎
Tool options...

繞圓變彎(彎曲)對象

toolset: tools_tem("[extension]SCULP_WRAP);
script: cmd("$SCULP_WRAP);

基本體
Tool options...

在圓內部拖動鼠標可在屏幕空間移動對象. 按鍵'X', 'Y', 'Z'可約束運動. 按SHIFT鍵, CTRL鍵, SHIFT+CTRL組合鍵移動方向箭頭和齒輪可進行離散運動和旋轉

toolset: tools_tem("[extension]SCULP_PRIM);
script: cmd("$SCULP_PRIM);

導入

將對象導入進場景. 按ENTER鍵可應用所選對象. 在沒有半自交點的情況下對象應是封閉的. 使用筆刷/移動/旋轉/縮放這幾種模式可放置對象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_MERGE);
script: cmd("$SCULP_MERGE);

Logo

使用此工具將任意抗鋸齒的黑白圖像轉換為3D對象

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_LOGO);
script: cmd("$SCULPT_LOGO);

拆分和關節
Tool options...

此工具允許將您的模型拆分成多個部分且在部分間創建關節. 它通過圓切割模型. 請注意, 圓應至少將模型拆分成2部分, 因此請小心放置圓

toolset: tools_tem("[extension]SplitNJoint);
script: cmd("$SplitNJoint);

拆分
Tool options...

通過E模式選擇可拆分(打破)塊上體積. 您可同時拆分多個體積和實例. 這對於創建某一對象的破碎狀態特別有用

toolset: tools_tem("[extension]SCULPT_RECTSPLIT);
script: cmd("$SCULPT_RECTSPLIT);

克隆
Tool options...

克隆所選塊

toolset: tools_tem("{clone}[extension]SCULPT_CLONE);
script: cmd("$SCULPT_CLONE);

剪切和克隆

剪切當前圖層的一部分並將其作為獨立對象導入

toolset: tools_tem("{clone}[extension]SCULPT_CUTNCLONE);
script: cmd("$SCULPT_CUTNCLONE);

體素擠壓
Tool options...

Works similar to Vox Layer without creating a new object layer but switching the entire layer to Surface mode

toolset: tools_tem("[extension]VoxExtrude);
script: cmd("$VoxExtrude);

點/面

使用LMB添加點. 使用RMB調整點和添加面. (看預覽) 使用SHIFT鍵強制圍成三角形. 為更准確地放置四邊面可按住光標靠近可能四邊面的中心

toolset: tools_tem("[RetopoTool]TopToolAddPoints);
script: cmd("$TopToolAddPoints);

蛇形

繪制'蛇形'. 使用LMB就可借助此工具進行繪制. 如有可能, 蛇形會趨向與相鄰的表面連接. 在描邊的末端按下LMB可平滑樣條, 直到其被釋放. 使用滑塊調節平滑速度. 可從有效的管道外形中選取蛇形形狀

toolset: tools_tem("{snake}[extension]SCULP_SPSTROKE);
script: cmd("$SCULP_SPSTROKE);

毛刺

繪制毛刺. 使用LMB就可借助此工具進行繪制. 毛刺會獨立於相鄰的表面存在, 其前端將逐漸變成點. 在描邊的末端按下LMB可平滑樣條, 直到其被釋放. 使用滑塊調節平滑速度. 可從有效的管道外形中選取毛刺形狀

toolset: tools_tem("{snake}[extension]SCULP_FREESP);
script: cmd("$SCULP_FREESP);

牙膏

體積構建工具. 其作用效果相當於蛇形工具, 不過卻使用alpha通道來調節樣條外形

toolset: tools_tem("{snake}[extension]SCULP_TUBE);
script: cmd("$SCULP_TUBE);

肌肉

肌肉工具. 觸筆壓力和深度強度決定了肌肉的厚度. 您可關閉"壓力取決於半徑"選項來獲取更精確的結果

toolset: tools_tem("{snake}[extension]SCULP_MUSCLE);
script: cmd("$SCULP_MUSCLE);

布料
Tool options...

實時布料仿真器. 請不要忘記按ENTER鍵將布料烘焙到當前體積對象. 而且在應用給對象之前最好將布料細分多次

toolset: tools_tem("{snake}[extension]SCULP_CLOTH);
script: cmd("$SCULP_CLOTH);

曲線
Tool options...

使用曲線(樣條)繪制. 使用LMB添加點, 使用RMB調整大小, 使用BKSP鍵刪除最後那個點. 按ENTER鍵可繪制曲線, 然後按ESC鍵可刪除該曲線. 在球體上使用CTRL鍵+LMB可連接點

toolset: tools_tem("[extension]SCULP_CURVES);
script: cmd("$SCULP_CURVES);

文本
Tool options...

在體積上繪制文本

toolset: tools_tem("[extension]SCULP_TEXT);
script: cmd("$SCULP_TEXT);

體素圖層
Tool options...

圍繞當前體積的凍結區域創建薄圖層. 使用凍結繪制可標記區域, 然後按"應用"按鈕確認

toolset: tools_tem("[extension]VoxLayer);
script: cmd("$VoxLayer);

塗層
Tool options...

此工具允許以無損方式在圖層之上添加塗層. 這類似於體素圖層, 不過您可使用曲線定義區域, 之後更改拐角點.

toolset: tools_tem("[extension]CurvesLayer);
script: cmd("$CurvesLayer);

Tube/Array
Tool options...

Tube/Array

toolset: tools_tem("[extension]TubeOnCurve);
script: cmd("$TubeOnCurve);

Bend Volume
Tool options...

Bend the object around the curve.

toolset: tools_tem("[extension]BendVolume);
script: cmd("$BendVolume);

Swep along Guide
Tool options...

The swept surface will be generated by moving profile along selected curve-guide. After appear Tool Options dialog You need select profile-curve. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, angle, twist-angle, etc. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SweptSurface);
script: cmd("$SweptSurface);

Rotate Surface
Tool options...

The Rotate surface will be generated by revolution the selected profile around selected curve-axis. After appear "Tool Options dialog" You need select curve-axis. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Angle, TwistAngle, etc. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]RotateSurface);
script: cmd("$RotateSurface);

Polyhedron
Tool options...

The Polyhedron will be generated by revolution ang moving the selected profile around selected curve-axis. After appear "Tool Options dialog" You need select curve-axis. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SurfacePrism);
script: cmd("$SurfacePrism);

Swept 2 Guide
Tool options...

The Sweep Surfaces will be generated by the moving profile along 2 curve guides. After \"Tool Options dialog\" appears, you must select 2 curves: guide curve and curve profile. The new item will be created in VoxTree and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, number of faces, smoothing. Delete the corresponding VoxTree object to stop filling the curve

toolset: tools_tem("[extension]SurfaceSwept2);
script: cmd("$SurfaceSwept2);

Swept 2 Gener
Tool options...

The Sweep Surface will be generated by by moving of 2 profiles along the selected guide-curve. After appear "Tool Options dialog" You need select second guide and curve-profile. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SurfaceSwept2Gener);
script: cmd("$SurfaceSwept2Gener);

增加分辨率

增加當前對象的分辨率

toolset: tools_tem("[VOX_SCULPT_TOOL]IncRes);
script: cmd("$IncRes);

重采樣

更改對象的分辨率

toolset: tools_tem("[VOX_SCULPT_TOOL]Resample);
script: cmd("$Resample);

清除

清除當前對象

toolset: tools_tem("[VOX_SCULPT_TOOL]Clear);
script: cmd("$Clear);

Base Clay

The basic brush for the voxel brushes. Duplicate, give the proper name and customize it.

toolset: tools_tem("[extension]BaseVoxBrush);
script: cmd("$BaseVoxBrush);

Wet Clay

This is similar to real clay. It consists of a clay effect and a little smudge.

toolset: tools_tem("[extension]WetClay);
script: cmd("$WetClay);

Extruder

The extrude of the voxels surface.

toolset: tools_tem("[extension]Extruder);
script: cmd("$Extruder);

Vox. Buildup

Constant buildup of the surface while the brush moves.

toolset: tools_tem("[extension]VoxBuildup);
script: cmd("$VoxBuildup);

Vox.粘土

擴張和平滑表面. 此選項用於增加光標下方的表面區域, 同時還會對其平滑

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_CLAY);
script: cmd("$SCULP_CLAY);

生長

向外擴張表面或向內收縮表面. 使用LMB可增加光標下方的表面區域. Brush的alpha通道不起作用, 不過筆刷的大小有用處. 使用CTRL鍵+LMB可收縮(塌縮)表面區域

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_GROW);
script: cmd("$SCULP_GROW);

填充

基於體素的填充工具. 此選項用於填充和柔化光標下方的表面中的空腔. 使用CTRL鍵+LMB可壓平突起

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_FILL);
script: cmd("$SCULP_FILL);

切開

使用筆刷的alpha通道進行切開操作. 此工具使用筆刷的alpha通道來擴張區域. 使用'深度'滑塊來調整雕刻的強度. 使用CTRL鍵可鏟進表面, 使用SHIFT鍵可平滑表面

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_CARVE);
script: cmd("$SCULPT_CARVE);

Blob
Tool options...

toolset: tools_tem("[extension]Blob);
script: cmd("$Blob);

球體

繪制球體. 單擊LMB可在3D空間中放置球體. 使用LMB繪制可生成跨屏幕平面的圓柱形體積

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_SPHERE);
script: cmd("$SCULP_SPHERE);

2D繪制

在平面上繪制. 此選項用於將2D平面提供為雕刻新體積的參照平面. LMB可使用當前筆刷繪制, '深度'滑塊可調整厚度. 使用RMB可定義平面位置. (朝向將一直與屏幕視圖平行.) 使用SHIFT鍵可獨立於平面來平滑表面

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_BRANCH);
script: cmd("$SCULPT_BRANCH);

平面

此工具允許切除明確定義的面前方的一切. 使用RMB和工具選項可對齊平面. 此工具涉及矩形繪制. 使用CTRL鍵則會取反此動作, 填充平面之後的孔洞

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_RASPFILE);
script: cmd("$SCULPT_RASPFILE);

刮擦

壓平表面. 這是基於體素的壓平工具. 光標下方的區域會被壓低進表面, 同時其也會被平滑

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_VXPLANE);
script: cmd("$SCULP_VXPLANE);

箍縮

箍縮表面. 此基於體素的箍縮工具用於繪制向光標中心靠近的表面特征. 按CTRL鍵+LMB可擴張表面

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_VXPINCH);
script: cmd("$SCULP_VXPINCH);