| Bend the object around the curve.
script: cmd("$BendVolume);
|
Bend around selected curves Bend the current sculpt object around the each selected curve. |
Tips! BendTips_HINT |
|
Immediate preview
The mesh will change immediately after changing parameters. It is not recommended for big meshes. |
Lock normals
Normals of the curve will be locked. Normals direction defines models initial rotation. The locking is important to prevent unexpected models screwing. If normals locking turned off the normal in each point will be taken from the pen direction. |
|
Show normals
Show curves normals direction. |
Show radius
Show radius of each curve point. Radius defines scale of objects if it varies along the curve. It is especially important if "Objects count" is more than one. |
|
Pick object Pick the object to be bent. |
Update mesh If the source object changed you need to press this button to update the mesh. |
|
Objects count
Objects count
Default value: 1
Max value: 100000 |
|
Shift model along X
The object is bent along the vertical axis that passes through the center of bound box. This slider moves the object along the one of horizontal axis in object space.
Default value: -1
Max value: 1 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 10`X", (&ShiftModelX) -(&cmOverallRotation), 0.0f |
|
X |
Move along the curve
Move the object along the curve
Default value: -1
Max value: 1 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 12`X", (&ModelExtraShift) -(&cmOverallRotation), 0.0f |
|
X |
Shift model along Z
The object is bent along the vertical axis that passes through the center of bound box. This slider moves the object along the one of horizontal axis in object space.
Default value: -1
Max value: 1 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 11`X", (&ShiftModelZ) -(&cmOverallRotation), 0.0f |
|
X |
Overall model scale
ModelExtraScale_HINT
Default value: 0
Max value: 2 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 14`X", (&ModelExtraScale) -(&cmOverallRotation), 1.0f |
|
X |
Decimation degree
As soon as you will press "Update mesh" the bent mesh will be updated. If you set decimation > 0% the mesh from the scene will be decimated. It is helpful if the bent mesh is too big for realtime bending.
Min value: "DecimationDegree"
Max value: 0
Default value: 0.99 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 13`X", (&DecimationDegree) -(&cmOverallRotation), 0.0f |
|
X |
|
전체 회전
전체 회전
Default value: -360
Max value: 360 |
NOSAVE, FUNCTION_CALL(reset_OverallRotation, "`0 0`X" |
|
X |
돌출
돌출
Default value: 0
Max value: 2 |
NOSAVE, FUNCTION_CALL(reset_cmExtrusion, "`0 1`X" |
|
X |
펼치기/묶기
펼치기/묶기
Default value: -2
Max value: 2 |
NOSAVE, FUNCTION_CALL(reset_cmTangentShift, "`0 2`X" |
|
X |
노멀 주위로 회전
노멀 주위로 회전
Default value: -360
Max value: 360 |
NOSAVE, FUNCTION_CALL(reset_cmEachPartRotation, "`0 22`X" |
|
X |
Tilt the model
Tilt the model around the tangent vector.
Default value: -360
Max value: 360 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 133`X", (&cmEachPartTilt) -(&cmOverallRotation), 0.0f |
|
X |
평균 스케일
평균 스케일
Min value: 0.1
Max value: 10
Default value: 1 |
NOSAVE, FUNCTION_CALL(reset_cmNormalScale, "`0 4`X" |
|
X |
탄젠트 스케일
탄젠트 스케일
Min value: 0.1
Max value: 10
Default value: 1 |
NOSAVE, FUNCTION_CALL(reset_cmTangentScale, "`0 5`X" |
|
X |
모델의 왜곡 금지
모델의 왜곡 금지 |
|
Use model Jitters
Apply jittering to the model instances. We recommend enable "RMB->Curve settings->Show radiuses" to control jittering well. Pay attention, it is very dependent on the curve radius and normal. |
Axial rotation Jitter
Rotate the object randomly around the curve direction.
Default value: 0
Max value: 180 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 30`X", (&AxialRotationJitter) -(&cmOverallRotation), 0.0f |
|
X |
Spin Jitter
Spin objects randomly around the normal of the curve.
Default value: 0
Max value: 180 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 31`X", (&SpinJitter) -(&cmOverallRotation), 0.0f |
|
X |
Tilt Jitter
Tilt the objects forth and back along the curve.
Default value: 0
Max value: 180 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 32`X", (&TiltJitter) -(&cmOverallRotation), 0.0f |
|
X |
Normal shift Jitter
Jitter along the normal of the curve.
Default value: 0
Max value: 1 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 33`X", (&NormalShiftJitter) -(&cmOverallRotation), 0.0f |
|
X |
Tangent shift Jitter
Jitter in tangent direction (otrhogonal to the curve and normal)
Default value: 0
Max value: 1 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 34`X", (&TangentShiftJitter) -(&cmOverallRotation), 0.0f |
|
X |
Directional shift Jitter
Shift the model randomly along the curve direction.
Default value: 0
Max value: 1 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 35`X", (&DirectionalShiftJitter) -(&cmOverallRotation), 0.0f |
|
X |
Model size Jitter
Variate the model scale.
Default value: 0
Max value: 1 |
NOSAVE, FUNCTION_CALL(reset_field, "`0 36`X", (&ModelSizeJitter) -(&cmOverallRotation), 0.0f |
|
X |
Jitter Seed
Change the seed to randomize the jittering.
Default value: 0
Max value: 65535 |
|
