Documentation 3DCoat 2021

Pose

Transpose l'objet en utilisant la sélection partielle d'un objet.

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_TRANSPOSE);
script: cmd("$SCULPT_TRANSPOSE);

Déplacement

Bouger une zone de surface. Pressez et bouger avec le Bouton Gauche pour bouger avec le curseur, relativement à la vue de l'écran. Utilisez CTRL pour bouger la surface le long de la normale. Différentes formes de stylet donneront différents résultats.

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_MOVE);
script: cmd("$SCULP_MOVE);

Transformer

Transformer l'objet en entier. Cliquer sur l'objet à transformer.

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_TRANSFORM);
script: cmd("$SCULPT_TRANSFORM);

Primitives
Tool options...

Bouger la souris dans l'espace libre pour bouger un objet dans l'espace écran. Utilisez les touches 'X', 'Y', 'Z' pour contraindre le mouvement. Bouger les flêches de direction et les engrenages avec MAJ, CTRL, MAJ+CTRL pour un mouvement discret et la rotation.

toolset: tools_tem("[extension]SCULP_PRIM);
script: cmd("$SCULP_PRIM);

Ajouter

Ajouter un objet à la scène. Presser ENTER pour ajouter l'objet sélectionné à la scène. L'objet doit être fermé sans auto-intersection. Utiliser différents modes - stylet/déplacement/rotation/échelle pour placer l'objet.

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULP_MERGE);
script: cmd("$SCULP_MERGE);

Courbes
Tool options...

Ajouter des points à la courbe en utilisant le Bouton Gauche, redimensionner par le Bouton Droit, le Retour Arrière pour effacer la dernière action, paint using ENTER, ESC - effacer la courbe. CTRL+Clic sur la boule - joindre les courbes.

toolset: tools_tem("[extension]SCULP_CURVES);
script: cmd("$SCULP_CURVES);

Texte
Tool options...

Tracer du texte en volume.

toolset: tools_tem("[extension]SCULP_TEXT);
script: cmd("$SCULP_TEXT);

Logo

Utiliser cet outil pour convertir toute image en noir & blanc sur un objet 3D.

toolset: tools_tem("[VOX_SCULPT_TOOL]SCULPT_LOGO);
script: cmd("$SCULPT_LOGO);

Serpentin

Dessinez un «serpent». Utilisez le Bouton Gauche pour dessiner avec cet outil. Le serpent aura tendance à se connecter avec les surfaces adjacentes, si possible. Tenir le Bouton Droit à la fin de la course pour une spline lisse. Ajustez la vitesse de lissage avec le curseur. Choisissez la forme du serpent à partir des profils de tube disponibles.

toolset: tools_tem("{Snake}[extension]SCULP_SPSTROKE);
script: cmd("$SCULP_SPSTROKE);

Pointes

Dessiner des pointes.

toolset: tools_tem("{Snake}[extension]SCULP_FREESP);
script: cmd("$SCULP_FREESP);

Découper
Tool options...

Découper

toolset: tools_tem("[extension]CutOff);
script: cmd("$CutOff);

Measure
Tool options...

Click to add points. Use SHIFT to align lines horizontally, vertically or diagonally. Press ESC to stop measure guide creation. New click will start new guide. Click on lines and points to split lines or drag points. Measure guides may be used in other tools as visual markers or snapping guides.
Doubleclick to erase point. Move nearby points together to erase captured point. Use CTRL to avoid snapping to existing points or lines, for example when you need to start new line from existing point or line.

toolset: tools_tem("[extension]Measure);
script: cmd("$Measure);

Noise

toolset: tools_tem("[extension]Noise);
script: cmd("$Noise);

Axe
Tool options...

Create a Radial Array. Any Voxel Layer can be duplicated and rotated in number and angle from a central axis

toolset: tools_tem("[extension]SCULPT_AXIAL);
script: cmd("$SCULPT_AXIAL);

Résolution +

Incrémenter la résolution de l'objet courant

toolset: tools_tem("[VOX_SCULPT_TOOL]IncRes);
script: cmd("$IncRes);

Rééchantillonner

Changer la résolution de l'objet

toolset: tools_tem("[VOX_SCULPT_TOOL]Resample);
script: cmd("$Resample);

Effacer

Effacer l'objet courant

toolset: tools_tem("[VOX_SCULPT_TOOL]Clear);
script: cmd("$Clear);

Coat
Tool options...

This tool allows to add coating over the layer in non-destructive way. It is similar to VoxLayer, but you may defune area using curves and change corner points later.

toolset: tools_tem("[extension]CurvesLayer);
script: cmd("$CurvesLayer);

Tube/Array
Tool options...

Tube/Array

toolset: tools_tem("[extension]TubeOnCurve);
script: cmd("$TubeOnCurve);

Bend Volume
Tool options...

Bend the object around the curve.

toolset: tools_tem("[extension]BendVolume);
script: cmd("$BendVolume);

Swep along Guide
Tool options...

The swept surface will be generated by moving profile along selected curve-guide. After appear Tool Options dialog You need select profile-curve. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, angle, twist-angle, etc. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SweptSurface);
script: cmd("$SweptSurface);

Rotate Surface
Tool options...

The Rotate surface will be generated by revolution the selected profile around selected curve-axis. After appear "Tool Options dialog" You need select curve-axis. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Angle, TwistAngle, etc. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]RotateSurface);
script: cmd("$RotateSurface);

Polyhedron
Tool options...

The Polyhedron will be generated by revolution ang moving the selected profile around selected curve-axis. After appear "Tool Options dialog" You need select curve-axis. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SurfacePrism);
script: cmd("$SurfacePrism);

Swept 2 Guide
Tool options...

The Sweep Surfaces will be generated by the moving profile along 2 curve guides. After \"Tool Options dialog\" appears, you must select 2 curves: guide curve and curve profile. The new item will be created in VoxTree and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, number of faces, smoothing. Delete the corresponding VoxTree object to stop filling the curve

toolset: tools_tem("[extension]SurfaceSwept2);
script: cmd("$SurfaceSwept2);

Swept 2 Gener
Tool options...

The Sweep Surface will be generated by by moving of 2 profiles along the selected guide-curve. After appear "Tool Options dialog" You need select second guide and curve-profile. The new item in VoxTree will be created and the mesh will be placed there. Select the corresponding object in VoxTree to be able to change parameters like thickness, Quantity of facets, smoothing. Delete the corresponding VoxTree element to stop filling the curve.

toolset: tools_tem("[extension]SurfaceSwept2Gener);
script: cmd("$SurfaceSwept2Gener);