Search the Community
Showing results for tags 'transform tool'.
Found 5 results
Sphere tool deformed after transform tool is used in another volume?
Rod posted a question in Questions & AnswersSo, the problem shows when I use the transform tool on a cube in volume layer 1, then after creating a new volume layer 2, as i start to draw with sphere tool, the sphere appears deformed to the same degree as the deformation i did previously to the cube on volume layer 1, even tho i did nothing to the new volume layer 2. After that, on every new volume layer i create the sphere tool draws deformed spheres. I dont know if its normal behavior or im doing something wrong or even if its just a 'tick off' away from a solution. Any help would be much appreciated! A cube, then drawn with the sphere tool in the volume layer 1, normal. Then, I used transform tool to squash them Finally I created the volume layer 2 and drew with the sphere tool, resulting the red one, already squashed as I drew UPDATE! If I make a second volume layer and use the sphere tool there, then use transform tool to the first volume layer and select back the one with the sphere there kind of resets the squashed tool and i can draw normally again, but if i go back again to the first one and try there or create a new volume layer from there squashes it again... weird
Trasnform Tool Outer Ring gone
Ben posted a topic in General 3DCoatHey guys, so I'm still new to 3D coat, and I must have pushed something, since the transform tool, the large outer ring of the gizmo is gone as well as the middle scaling option, and I can't seem to figure out how to bring it back. Is there a way to fix this? Thanks
Transform Tool - Related Issue
Fello4 posted a topic in General 3DCoatI've been having a problem with the transform tool, in the Sculpt room. Whenever I put more than one mesh objects and use the transform tool, it is "focused" on both of them. How am I able to get it "focused" on one mesh object, rather than two mesh objects. Please respond ASAP, thank you!
Предложения по улучшению Pose и Transform Tool-ов
MikeMS posted a topic in Предложения, вопросыВсем привет! 1. Очень хочется иметь возможность в Surface режиме при использовании Pose Tool-а клонировать подобъекты. К примеру у меня есть некий архитектурный объект составленный из каменей, которые я выбираю через Select Object (в Transpose Mode), кручу, скейлю и передвигаю Pose Tool-ом, но очень часто нужно тут-же взять, выбрать один из камней или блоков и склонировать его переместив в нужное место. Сейчас это приходится делать держа все камушки в разных слоях, что очень неудобно при большом их количестве. Очень было-бы удобно дублировать выбранные подобъекты cлоя (при этом они остаются в том-же слое) просто зажав хоткей и переместив гизмо (собственно именно так как это сделано в большинстве программ). 2. Добавить свободное вращение для Transform Gizmo, тоесть вращение сразу по всем осям в зависимости от того куда мы двигаем мышь/перо. Как это работает - можно посмотреть в 3д Максе, когда мы "тянем" не за манипуляторы гизмо. Вот по такому-же принципу былобы круто это реализовать и в 3d-Coat`е. 3. Добавить масштабирование сразу по 2-м осям. Тут думаю всё понятно Можно это кстати сделать по зажатию горячей клавиши масштабирования по одной из осей - тоесть мне нужно отмасштабировать равномерно по X и Y оси, я зажимаю например Alt и тяну за манипулятор масштабирования оси Z - и мой объект скейлится по оси XY. Хорошо-бы это занести в Trello - но мне всё это будет сложно сформулировать на английском, если кто-то это сможет сделать - былобы вобще здорово!
Working Steps Same, Results Different
Bloodsong posted a topic in General 3DCoatokay, i thought i had a methodology worked out that worked for me, but... going through the same steps is giving me different results. is it me, or is this some kind of bug i need to report? OVERVIEW: i'm trying to make a morph for a poser figure. problem number one for poser obj's is that they are incredibly microscopic compared to the universes of other 3d tools. problem number one for making morphs is keeping the vertex order and count of the object the same. here are the exact steps i followed, and the anomalous results i got from them. Version: 3D Coat V4.00.b15AGL ======================== ROUND ONE TEST 1: No Symmetry Start in Surface Modeling Mode (i figured this would preserve the obj surface without mucking around in all those voxels) Open/Import the base OBJ file. The Transform Tool is selected when the OBJ is brought into the scene. Move the Gizmo Only to 0,0,0. Scale 200% five times. (Note: my scaling math is off during this part of the test, so of course the position and scale of the resulting morph is FUBAR, but i'll include it here for the sake of completeness.) Select the Surface Tool: Expand Click 2x on the Right Forehead (i'm using a head model base) Select Adjust: Transform Tool (note: if I select the Transform Tool I saved in my presets, it tries to change me to voxel mode) Move Gizmo Only to 0,0,0; Scale 0.25% five times. (yes, totally WAY wrong.) Export OBJ, hit Cancel on mesh density reduction. TEST 1: Results Load Morph Target in Poser; turn on Attempt Vertex Correction. yeah, the scaling is FUBAR, but... the important thing, the vertex order is clearly correct (I can see the shrunken, misplaced head is not exploding). However... i don't see the lump on the forehead. ??? it just looks like the base object. TEST 2: Mirrored Since I know Sculptris totally FUBARs the vertex order when going into symmetry mode, i'm testing symmetrically painted morphs separately. Undo the Previous scene 5x, until the object is un-shrunken, and undo the forehead lump. Turn On Symmetry X. Use the Surface Tool: Expand 2x on the forehead. Two lumps are created. Repeat the same (incorrect) de-scaling and exporting as TEST 1. TEST 2 Results Load the Morph Target in Poser. This time, turn OFF Attempt to Correct Vertex Order (just to test) Results are the same... exactly the same. First, hooray! the vertices are all in the correct order and the morph doesn't explode. Secondly... uh... still no lumps on the forehead. EXPERIMENT ONE Undo the file back to the base head that was scaled up and has lumps. Attempt the de-scaling 4x, then 1x, try to figure out where my percentage math is screwed up. EXPERIMENT ONE Results the 4x descaled head was still a pinhead. the 1x descaled head was too high/large (naturally), and also exploded. NOTE: why is it now exploding, when before it was perfectly fine? ROUND TWO at about this time, i figured out my scaling routine is wrong. duh. yeah, so sue me, i'm not a math major. i calculated if i just scaled the object up 1000%, then i should scale it down 2.5% TEST 2.1 Start new scene, go to New Surface Scene. Import the base OBJ file. Use the Transform Tool (gizmo at 0,0,0) to Scale 1000%. PROBLEM: why is the object not scaling up where i can see it, like it just did before? (okay, doing 200% 5x vs 1000% 1x is probably different, but... that different? if i hit the scaling at 1000% again, then the object was large enough to see. did it ignore my first scale-up? did i put it in wrong? i restarted 3dcoat a couple of times, because it appeared to not be working as expected. TEST 2.2 i decided to scale up 2000% and scale down 1.25%. here are my notes on this attempt: (okay, stupid newbie mistake: always say yes to merge) Turn on Symmetry X. Surface Tool: Expand 2x on forehead. Resize (Gizmo @ 0,0,0) 1.25% Export OBJ, Cancel on reduction. TEST 2.1 Result: PROBLEM: target geometry has wrong number of vertices. 38,246 vertices instead of 38,290 it has 112,857 polygons instead of 38,354 and it is all triangulated! (which the original OBJ is not.) NOTE: i have not changed my import/export/sculpting/scaling methodology. why am i now getting wrong number of vertices results? i checked the original exported mirror test obj. it, too was triangulated, and it, too, had almost twice as many polygons as the original OBJ file, but... it had the correct number of vertices in the correct order. PROBLEM: when i imported the obj into poser, the head was not the right size/position as expected (could be my scaling math. i used to have a program that did poser obj scaling and de-scaling, but i no longer have that.) however, i DID see the knobs on the forehead, unlike previously. TOO LONG; DIDN'T READ: importing and exporting an object for a morph resulted in a morph that worked, except the sculpting that was done on it did not appear. exporting the same object again resulted in a morph that exploded. importing and exporting an object again, in a new file, using the same methodology as before, resulted in a morph that didn't work because of wrong number of vertices. but did have the sculpting appear on it. bloodsong needs help scaling an object up to work on it, and then back down so it is in its original size/space (it is not centered in the universe) for export. what, exactly, of my system specs do you need and where can i get a dump of them for you? thank you for your extreme patience.