Advanced Member blackant Master Posted March 18 Advanced Member Report Share Posted March 18 Hi guys, I made a short video to explain a problem i have actually : Quote Link to comment Share on other sites More sharing options...
Featured Comment Oleg Shapov Posted March 18 Featured Comment Report Share Posted March 18 4 hours ago, blackant Master said: I made a short video to explain a problem i have actually Hello! Try increasing the radius, it looks like the object is very small Quote Link to comment Share on other sites More sharing options...
Reputable Contributor Solution digman Posted March 18 Reputable Contributor Solution Report Share Posted March 18 Your first control point for your curve seems to be off plane a few times. I noticed at the last you had it working for a moment. Try this to fix your problem. Since this is a rectangular type of model and it appears, you are not trying to wrap a text around a corner, have the view lined up correctly before placing your first control point. Press the ESC key to clear the curve. Do not start the curve right at the sharp edge of the model. Make sure the cursor is on the correct plane before placing the first control point. My picture shows the first control point is starting on the wrong plane. Blue line points to the control point. Side Note: Use the e-panel brush shown in the picture. It will help to create the text placement correctly when applying the text. I hope the above is helpful. Quote Link to comment Share on other sites More sharing options...
Advanced Member blackant Master Posted March 19 Author Advanced Member Report Share Posted March 19 22 hours ago, Oleg Shapov said: Hello! Try increasing the radius, it looks like the object is very small I think this aws the issue, it looks fixed now, thanks Quote Link to comment Share on other sites More sharing options...
Advanced Member blackant Master Posted March 19 Author Advanced Member Report Share Posted March 19 After more investigation, it seems not totally corrected. Because with the smallest size of the radius, with any kind of brush stroke, I have the same problem on a small model, whitch i click in the middle of the face and the circle doesn't look facing it, and the second near the border neither, And moving a little the marks makes it moves like on the video. Quote Link to comment Share on other sites More sharing options...
Oleg Shapov Posted March 19 Report Share Posted March 19 1 hour ago, blackant Master said: I have the same problem on a small model Can you send me your mesh? No textures. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Posted by Oleg Shapov,
0 reactions
Go to this post
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.