Have you tried using the Presets Panel?

just wondering , will surface mode support quad multires soon or even subdividing? triangles always destroys the mesh

I got 3DCoat to work by copying its files, but I just noticed that it doesn't have access to some other files, my /storage and /storage1 drives, in addition to /opt. Those two are ZFS drives, I assume the distrobox doesn't need ZFS drivers or anything since it should just see the files? So whatever is happening here is the same as not being able to see /opt... I guess?

@veris turns out it was easy to solve. It only used Docker because I already had that installed I guess? Anyhow I've updated my post with the solution. From my past wrestling with distrobox I was sure it would be a three-hour long ordeal. Happy to be wrong!  

Have you tried with podman instead of docker?

@veris 2 problems for me... 1. The /opt directory, where my 3D Coat is installed, is empty in distrobox and I can't even ln -s the 3D coat into another directory because the link is broken in distrobox 2. I have to give it root permission because of Docker. I don't want to give it root permission, seems like a security risk... I can probably figure this out on my own but if you know the solution please tell me. edit: it was way easier than I expected.  Linux (Ubuntu-based): Run the command: sudo usermod -aG docker $USER Log out and log back in to apply the changes. Thanks for any help

@SreckoMif this was for me, then  nodespaghetti@noodlebot:/opt/3DCoat-2024.28-02$ ldd 3dcoat     linux-vdso.so.1 (0x00007ffe3fbfa000)     libgtk-3.so.0 => /lib/x86_64-linux-gnu/libgtk-3.so.0 (0x00007dea6b000000)     libgdk-3.so.0 => /lib/x86_64-linux-gnu/libgdk-3.so.0 (0x00007dea6b8b2000)     libpangocairo-1.0.so.0 => /lib/x86_64-linux-gnu/libpangocairo-1.0.so.0 (0x00007dea6b8a1000)     libpango-1.0.so.0 => /lib/x86_64-linux-gnu/libpango-1.0.so.0 (0x00007dea6b836000)     libharfbuzz.so.0 => /lib/x86_64-linux-gnu/libharfbuzz.so.0 (0x00007dea6aef3000)     libatk-1.0.so.0 => /lib/x86_64-linux-gnu/libatk-1.0.so.0 (0x00007dea6b80a000)     libcairo-gobject.so.2 => /lib/x86_64-linux-gnu/libcairo-gobject.so.2 (0x00007dea6b7fe000)     libcairo.so.2 => /lib/x86_64-linux-gnu/libcairo.so.2 (0x00007dea6adaf000)     libgdk_pixbuf-2.0.so.0 => /lib/x86_64-linux-gnu/libgdk_pixbuf-2.0.so.0 (0x00007dea6b7d0000)     libgio-2.0.so.0 => /lib/x86_64-linux-gnu/libgio-2.0.so.0 (0x00007dea6abdf000)     libgobject-2.0.so.0 => /lib/x86_64-linux-gnu/libgobject-2.0.so.0 (0x00007dea6ab7c000)     libglib-2.0.so.0 => /lib/x86_64-linux-gnu/libglib-2.0.so.0 (0x00007dea6aa33000)     libX11.so.6 => /lib/x86_64-linux-gnu/libX11.so.6 (0x00007dea6a8f6000)     libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007dea6a80d000)     libpng16.so.16 => /lib/x86_64-linux-gnu/libpng16.so.16 (0x00007dea6a7d5000)     libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007dea6a7b9000)     libstdc++.so.6 => /lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007dea6a400000)     libGL.so.1 => /lib/x86_64-linux-gnu/libGL.so.1 (0x00007dea6a732000)     libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007dea6b7c7000)     libexpat.so.1 => /lib/x86_64-linux-gnu/libexpat.so.1 (0x00007dea6a707000)     libutil.so.1 => /lib/x86_64-linux-gnu/libutil.so.1 (0x00007dea6a702000)     libfbxsdk.so => LinuxLibs/libfbxsdk.so (0x00007dea69600000)     libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007dea6a6d2000)     libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007dea6a6cd000)     libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007dea69200000)     libgmodule-2.0.so.0 => /lib/x86_64-linux-gnu/libgmodule-2.0.so.0 (0x00007dea6a6c6000)     libpangoft2-1.0.so.0 => /lib/x86_64-linux-gnu/libpangoft2-1.0.so.0 (0x00007dea6a6ab000)     libfontconfig.so.1 => /lib/x86_64-linux-gnu/libfontconfig.so.1 (0x00007dea6a3af000)     libfribidi.so.0 => /lib/x86_64-linux-gnu/libfribidi.so.0 (0x00007dea6a68d000)     libepoxy.so.0 => /lib/x86_64-linux-gnu/libepoxy.so.0 (0x00007dea6a28c000)     libXi.so.6 => /lib/x86_64-linux-gnu/libXi.so.6 (0x00007dea6a279000)     libatk-bridge-2.0.so.0 => /lib/x86_64-linux-gnu/libatk-bridge-2.0.so.0 (0x00007dea6a23d000)     libXfixes.so.3 => /lib/x86_64-linux-gnu/libXfixes.so.3 (0x00007dea6a683000)     libxkbcommon.so.0 => /lib/x86_64-linux-gnu/libxkbcommon.so.0 (0x00007dea6a1f4000)     libwayland-client.so.0 => /lib/x86_64-linux-gnu/libwayland-client.so.0 (0x00007dea6a1e4000)     libwayland-cursor.so.0 => /lib/x86_64-linux-gnu/libwayland-cursor.so.0 (0x00007dea6a1da000)     libwayland-egl.so.1 => /lib/x86_64-linux-gnu/libwayland-egl.so.1 (0x00007dea6a1d5000)     libXext.so.6 => /lib/x86_64-linux-gnu/libXext.so.6 (0x00007dea6a1c1000)     libXcursor.so.1 => /lib/x86_64-linux-gnu/libXcursor.so.1 (0x00007dea6a1b5000)     libXdamage.so.1 => /lib/x86_64-linux-gnu/libXdamage.so.1 (0x00007dea6a1b0000)     libXcomposite.so.1 => /lib/x86_64-linux-gnu/libXcomposite.so.1 (0x00007dea6a1ab000)     libXrandr.so.2 => /lib/x86_64-linux-gnu/libXrandr.so.2 (0x00007dea6a19e000)     libXinerama.so.1 => /lib/x86_64-linux-gnu/libXinerama.so.1 (0x00007dea6a199000)     libthai.so.0 => /lib/x86_64-linux-gnu/libthai.so.0 (0x00007dea6a18e000)     libfreetype.so.6 => /lib/x86_64-linux-gnu/libfreetype.so.6 (0x00007dea6a0c2000)     libgraphite2.so.3 => /lib/x86_64-linux-gnu/libgraphite2.so.3 (0x00007dea6a09a000)     libXrender.so.1 => /lib/x86_64-linux-gnu/libXrender.so.1 (0x00007dea6a08e000)     libxcb.so.1 => /lib/x86_64-linux-gnu/libxcb.so.1 (0x00007dea6a065000)     libxcb-render.so.0 => /lib/x86_64-linux-gnu/libxcb-render.so.0 (0x00007dea6a056000)     libxcb-shm.so.0 => /lib/x86_64-linux-gnu/libxcb-shm.so.0 (0x00007dea6a051000)     libpixman-1.so.0 => /lib/x86_64-linux-gnu/libpixman-1.so.0 (0x00007dea69551000)     libjpeg.so.8 => /lib/x86_64-linux-gnu/libjpeg.so.8 (0x00007dea694ce000)     libmount.so.1 => /lib/x86_64-linux-gnu/libmount.so.1 (0x00007dea69481000)     libselinux.so.1 => /lib/x86_64-linux-gnu/libselinux.so.1 (0x00007dea69454000)     libffi.so.8 => /lib/x86_64-linux-gnu/libffi.so.8 (0x00007dea69448000)     libpcre2-8.so.0 => /lib/x86_64-linux-gnu/libpcre2-8.so.0 (0x00007dea69166000)     /lib64/ld-linux-x86-64.so.2 (0x00007dea6b9d8000)     libGLdispatch.so.0 => /lib/x86_64-linux-gnu/libGLdispatch.so.0 (0x00007dea690ae000)     libGLX.so.0 => /lib/x86_64-linux-gnu/libGLX.so.0 (0x00007dea69415000)     libatspi.so.0 => /lib/x86_64-linux-gnu/libatspi.so.0 (0x00007dea69074000)     libdbus-1.so.3 => /lib/x86_64-linux-gnu/libdbus-1.so.3 (0x00007dea69025000)     libdatrie.so.1 => /lib/x86_64-linux-gnu/libdatrie.so.1 (0x00007dea6901c000)     libbz2.so.1.0 => /lib/x86_64-linux-gnu/libbz2.so.1.0 (0x00007dea69008000)     libbrotlidec.so.1 => /lib/x86_64-linux-gnu/libbrotlidec.so.1 (0x00007dea68ffa000)     libXau.so.6 => /lib/x86_64-linux-gnu/libXau.so.6 (0x00007dea68ff4000)     libXdmcp.so.6 => /lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007dea68fec000)     libblkid.so.1 => /lib/x86_64-linux-gnu/libblkid.so.1 (0x00007dea68fb1000)     libsystemd.so.0 => /lib/x86_64-linux-gnu/libsystemd.so.0 (0x00007dea68ed1000)     libbrotlicommon.so.1 => /lib/x86_64-linux-gnu/libbrotlicommon.so.1 (0x00007dea68eae000)     libbsd.so.0 => /lib/x86_64-linux-gnu/libbsd.so.0 (0x00007dea68e98000)     libcap.so.2 => /lib/x86_64-linux-gnu/libcap.so.2 (0x00007dea68e8b000)     libgcrypt.so.20 => /lib/x86_64-linux-gnu/libgcrypt.so.20 (0x00007dea68d41000)     liblz4.so.1 => /lib/x86_64-linux-gnu/liblz4.so.1 (0x00007dea68d1f000)     liblzma.so.5 => /lib/x86_64-linux-gnu/liblzma.so.5 (0x00007dea68ced000)     libzstd.so.1 => /lib/x86_64-linux-gnu/libzstd.so.1 (0x00007dea68c33000)     libmd.so.0 => /lib/x86_64-linux-gnu/libmd.so.0 (0x00007dea68c24000)     libgpg-error.so.0 => /lib/x86_64-linux-gnu/libgpg-error.so.0 (0x00007dea68bfd000) This is the latest version 2024.28-2

@Oleg ShapovHello Oleg, this file is causing the crash for me on Linux (Kubuntu 24.04). I don't expect there to be a bug on Windows 11! Thank you for your reply.

Just noticed this in the terminal... `(3dcoat-Ubuntu20.04:333482): Gtk-WARNING **: 10:01:18.448: Unable to locate theme engine in module_path: "adwaita",`   donno how to make adwaita work, or if it is related.

Please share the files that are definitely causing the crash so I can test it on Win11

You are doing everything right. The radius of the bevel curve points is equal to the radius of the brush. You can assign the radius of a single point.

Sorry, i just dont know yet how its called in 3d Coat, im literally trying coat for a few hours atm so can make a lot of mistakes and suffer from misleading. Im not even sure now is that really a spline or maybe its a brush radius? Anyway, heres how my spline would look like right after creation, so the width/radius/diameter of the spline/brush are zero. In this case Bevel Tool will freeze 3d Coat: But If i hold shift+RMB and drag before creation of the spline, i would change the radius (those blue circles). In this case Bevel Tool will perform without any issues:

I sculpted an .fbx in Blender and then sent the mesh to 3Dcoat. The artifacts appeared when the mesh had non-planar polygons or the triangles were too stretched. Could you create a simple sculpture in Blender that has artifacts after importing to 3Dcoat and share with us?

You have specified an incorrect path for exchange.  

Bevel Radius scale has a Level Cap at 10% What do you mean with Spline width ?

I understood. May I ask if an add-on is required when importing? Also, could you please clarify whether Blender’s Applink for 3DCoat functions the same as the import feature in 3DCoat Textura?

When I selected automatic mapping during import, artifacts appeared. This is a model that I’ve completely finished UV mapping in Blender.  I’m importing multiple objects at once, but I found that importing individual objects does not cause artifacts, and they import without any issues. I am sorry, but I can’t share this FBX file.