Advanced Member Scary M Posted May 19, 2020 Author Advanced Member Report Share Posted May 19, 2020 (edited) An Update - Im thinking i might drop the pleat at the bottom and flare out the trouser calf? Apart from that shes nearly ready for posing and hair (not looking forward to the hair) Edited May 19, 2020 by Scary M 2 Quote Link to comment Share on other sites More sharing options...
Advanced Member Falconius Posted May 20, 2020 Advanced Member Report Share Posted May 20, 2020 (edited) 16 hours ago, Scary M said: Im thinking i might drop the pleat at the bottom and flare out the trouser calf? Maybe. To be honest I'd either pleat the tops and flare the bottoms, or make them even looser at the tops of all those leg ring things. Just so it looks more deliberate. Edited May 20, 2020 by Falconius Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted May 20, 2020 Author Advanced Member Report Share Posted May 20, 2020 3 hours ago, Falconius said: Maybe. To be honest I'd either pleat the tops and flare the bottoms, or make them even looser at the tops of all those leg ring things. Just so it looks more deliberate. Ill have a play, thank you for input. update on shoes, the shoes where raw surface output and needed retopologising for clarity and posing. I refined design a little more more heel like and reduced the size, all done in 3d coat then taken over silo for polymodelling then over to ZB for refinement. hope you like? Laces tonight. 4 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted May 20, 2020 Author Advanced Member Report Share Posted May 20, 2020 Flared?? I like it more i think let me know which you guys prefer, still needs work though- Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted May 20, 2020 Author Advanced Member Report Share Posted May 20, 2020 Boot update 1 Quote Link to comment Share on other sites More sharing options...
Reputable Contributor AbnRanger Posted May 21, 2020 Reputable Contributor Report Share Posted May 21, 2020 Nice work. As a purely stylistic choice, I would perhaps make the tread of the boots relatively thin in the forefoot area and keep the height in the heels. This way it keeps that look of high heels, but still has that rugged boot look, too...having a nice, unique contrast. Quote Link to comment Share on other sites More sharing options...
Advanced Member Falconius Posted May 21, 2020 Advanced Member Report Share Posted May 21, 2020 Bell bottoms! I like it. Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted May 22, 2020 Author Advanced Member Report Share Posted May 22, 2020 4 hours ago, Falconius said: Bell bottoms! I like it. Yup Very rough Pose - 1 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted May 23, 2020 Author Advanced Member Report Share Posted May 23, 2020 quick update - 2 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted May 23, 2020 Author Advanced Member Report Share Posted May 23, 2020 2 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted May 25, 2020 Author Advanced Member Report Share Posted May 25, 2020 update - 2 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 5, 2021 Author Advanced Member Report Share Posted February 5, 2021 A few new works can you guess what were doing? 2 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 7, 2021 Author Advanced Member Report Share Posted February 7, 2021 (edited) I really didnt like the way the last sculpt was going so heres the new Doom 3 marine Edited February 7, 2021 by Scary M 2 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 15, 2021 Author Advanced Member Report Share Posted February 15, 2021 1 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 15, 2021 Author Advanced Member Report Share Posted February 15, 2021 Yes its in Z Brush but I started it in 3D Coat i do all my low level sculpts in 3d coat. 2 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 22, 2021 Author Advanced Member Report Share Posted February 22, 2021 1 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 23, 2021 Author Advanced Member Report Share Posted February 23, 2021 2 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 25, 2021 Author Advanced Member Report Share Posted February 25, 2021 1 Quote Link to comment Share on other sites More sharing options...
Reputable Contributor AbnRanger Posted February 25, 2021 Reputable Contributor Report Share Posted February 25, 2021 Leigh, could you come up with a Character Sculpting series, in 3DCoat, and offer it on a site like Gumroad? If you make a trailer for the series, Pilgway will share/promote it on the 3DCoat Youtube Channel Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 25, 2021 Author Advanced Member Report Share Posted February 25, 2021 Hi Don, ill think about it. I will be putting up some sculpting and texturing stuff on You tube with a Patreon soon, but no Actual paid content, im not doing that stuff anymore. 1 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 26, 2021 Author Advanced Member Report Share Posted February 26, 2021 1 Quote Link to comment Share on other sites More sharing options...
Advanced Member insignet Posted February 27, 2021 Advanced Member Report Share Posted February 27, 2021 Really cool Leigh thanks for sharing ! Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 27, 2021 Author Advanced Member Report Share Posted February 27, 2021 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 27, 2021 Author Advanced Member Report Share Posted February 27, 2021 8 hours ago, insignet said: Really cool Leigh thanks for sharing ! No worries really enjoying this project. Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted February 27, 2021 Author Advanced Member Report Share Posted February 27, 2021 Most of texture work all hard surface and retopology and UV work done in coat. Organics in between here and ZB I find it easier to get better realism when using ZB. Quote Link to comment Share on other sites More sharing options...
Reputable Contributor AbnRanger Posted March 6, 2021 Reputable Contributor Report Share Posted March 6, 2021 On 2/25/2021 at 5:55 PM, Scary M said: Hi Don, ill think about it. I will be putting up some sculpting and texturing stuff on You tube with a Patreon soon, but no Actual paid content, im not doing that stuff anymore. I understand that, but Gumroad is just a marketplace to sell your items...sort of like an eBay or Amazon for CG content. Artstation, I think, has a marketplace for such things as well. Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted March 12, 2021 Author Advanced Member Report Share Posted March 12, 2021 More hard surface voxels 2 Quote Link to comment Share on other sites More sharing options...
Advanced Member Scary M Posted March 14, 2021 Author Advanced Member Report Share Posted March 14, 2021 (edited) Rant coming sorry guys - Bit frustrated with 3D coat at the moment it seems I have run into a Massive issue with Smoothing Groups Why if I retopologise a high Res sculpt does 3D Coat automatically apply smoothing to a mesh on baking regardless of options selected. I have to export my retopo out of 3dcoat and remove smoothing to bake it in another App successfully. Of course I'd love to bake my maps in 3D Coat but it produces a normal map that will not render properly in game due to the fecking auto smoothing that I have no control over. I have wasted over a week in total on this project trying to find a solution, and it turned out to be so simple. I love 3D coat I really do but when a BIG problem like this which has been reported since before 2018 it still present I have to wonder! So we have the option to have auto smoothing groups option like any other software but this option is a CHECK BOX if I uncheck a check box as I don't want smoothing. I don't expect smoothing if I can't have no smoothing then WHY bother with a check box in the first place. It's frustrating see because I've run into this issue before and had to switch software. I've hung on in there this time but I've been baking my maps elsewhere which is a real shame because honestly I could do pretty much the whole process to in 3d coat. There is supposed to be a workaround of exporting my retopo (Get this into another app to add/remove my smoothing) and then re import it into the paintroom where I can then somehow bake from the paint room the sculpt that I had in the sculpt room, which is lost when I import into the paint room, or something like that.... but honestly I can't be bothered. I'll just bake my normals in another software. Rant done. Still loving coat for sculpting. Edited March 14, 2021 by Scary M Quote Link to comment Share on other sites More sharing options...
Reputable Contributor AbnRanger Posted March 15, 2021 Reputable Contributor Report Share Posted March 15, 2021 9 hours ago, Scary M said: Rant coming sorry guys - Bit frustrated with 3D coat at the moment it seems I have run into a Massive issue with Smoothing Groups Why if I retopologise a high Res sculpt does 3D Coat automatically apply smoothing to a mesh on baking regardless of options selected. I have to export my retopo out of 3dcoat and remove smoothing to bake it in another App successfully. Of course I'd love to bake my maps in 3D Coat but it produces a normal map that will not render properly in game due to the fecking auto smoothing that I have no control over. I have wasted over a week in total on this project trying to find a solution, and it turned out to be so simple. I love 3D coat I really do but when a BIG problem like this which has been reported since before 2018 it still present I have to wonder! So we have the option to have auto smoothing groups option like any other software but this option is a CHECK BOX if I uncheck a check box as I don't want smoothing. I don't expect smoothing if I can't have no smoothing then WHY bother with a check box in the first place. It's frustrating see because I've run into this issue before and had to switch software. I've hung on in there this time but I've been baking my maps elsewhere which is a real shame because honestly I could do pretty much the whole process to in 3d coat. There is supposed to be a workaround of exporting my retopo (Get this into another app to add/remove my smoothing) and then re import it into the paintroom where I can then somehow bake from the paint room the sculpt that I had in the sculpt room, which is lost when I import into the paint room, or something like that.... but honestly I can't be bothered. I'll just bake my normals in another software. Rant done. Still loving coat for sculpting. That is something only Andrew (support@3dCoat.com/andrewshpagin@gmail.com could address/fix...I understand the frustration. Anything that causes you to lose time trying to work around, is something Andrew typically will stop what he is doing and try to fix. Quote Link to comment Share on other sites More sharing options...
Gorbatovsky Posted March 15, 2021 Report Share Posted March 15, 2021 10 hours ago, Scary M said: Rant coming sorry guys - Bit frustrated with 3D coat at the moment it seems I have run into a Massive issue with Smoothing Groups Why if I retopologise a high Res sculpt does 3D Coat automatically apply smoothing to a mesh on baking regardless of options selected. I have to export my retopo out of 3dcoat and remove smoothing to bake it in another App successfully. Of course I'd love to bake my maps in 3D Coat but it produces a normal map that will not render properly in game due to the fecking auto smoothing that I have no control over. I have wasted over a week in total on this project trying to find a solution, and it turned out to be so simple. I love 3D coat I really do but when a BIG problem like this which has been reported since before 2018 it still present I have to wonder! So we have the option to have auto smoothing groups option like any other software but this option is a CHECK BOX if I uncheck a check box as I don't want smoothing. I don't expect smoothing if I can't have no smoothing then WHY bother with a check box in the first place. It's frustrating see because I've run into this issue before and had to switch software. I've hung on in there this time but I've been baking my maps elsewhere which is a real shame because honestly I could do pretty much the whole process to in 3d coat. There is supposed to be a workaround of exporting my retopo (Get this into another app to add/remove my smoothing) and then re import it into the paintroom where I can then somehow bake from the paint room the sculpt that I had in the sculpt room, which is lost when I import into the paint room, or something like that.... but honestly I can't be bothered. I'll just bake my normals in another software. Rant done. Still loving coat for sculpting. Today at the rally we discussed this message for 10 minutes and did not understand what needs to be done. Please make a small video so that your technical process is clear. And write what needs to be done. Thank. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.