Contributor artman Posted May 6, 2011 Contributor Report Share Posted May 6, 2011 The only thing I can't reproduce - problems with symmetry. Don't forget buttons Fit and Directional fit. Hmmm...Strange.On my side Symmetry through all volumes works fine with Move brush (Im still amazed how good it works actually ...really impressive), but it does not work with pose tool,only one voxel layer is moved. What is strange is that the object that is moved is not the necessarily the main selected voxel layer,its the object which has the biggest pose selection.Other object stays unmoved. Desactivating symmetry makes both move properly. EDIT: GOT IT. SYMMETRY PROBLEM IS CUDA RELATED.With Cuda off it works ok. 1 Link to comment Share on other sites More sharing options...
Javis Posted May 6, 2011 Report Share Posted May 6, 2011 Good find Artman. In all my tests I didn't realize I had CUDA off. With CUDA on it doesn't work. Well done sir. Link to comment Share on other sites More sharing options...
philnolan3d Posted May 7, 2011 Report Share Posted May 7, 2011 As I was writing this 3D World tutorial I found myself wondering why the retopo Brush tool is the Create section of the tools. Wouldn't it make more sense to move it to the Tweak group? Link to comment Share on other sites More sharing options...
Andrew Shpagin Posted May 8, 2011 Author Report Share Posted May 8, 2011 Excuse, I was promising Mac & Linux builds today, but was not able. Almost all issues solved, but still not reary. I hope, will do it in Monday. Link to comment Share on other sites More sharing options...
Andrew Shpagin Posted May 8, 2011 Author Report Share Posted May 8, 2011 As I was writing this 3D World tutorial I found myself wondering why the retopo Brush tool is the Create section of the tools. Wouldn't it make more sense to move it to the Tweak group? Yes, agree, will move it there. Link to comment Share on other sites More sharing options...
philnolan3d Posted May 8, 2011 Report Share Posted May 8, 2011 Yes, agree, will move it there. Of course now that part of the tutorial will be wrong. I figured that would happen with some tool or another. Link to comment Share on other sites More sharing options...
Advanced Member LorenzoS Posted May 8, 2011 Advanced Member Report Share Posted May 8, 2011 Excuse, I was promising Mac & Linux builds today, but was not able. Almost all issues solved, but still not reary. I hope, will do it in Monday. No problem Andrew. Link to comment Share on other sites More sharing options...
Andrew Shpagin Posted May 9, 2011 Author Report Share Posted May 9, 2011 Mac build 3.5.19A uploaded. Almost all mentioned issues of 3.5.19 are fixed there. Link to comment Share on other sites More sharing options...
Andrew Shpagin Posted May 9, 2011 Author Report Share Posted May 9, 2011 Win build 3.5.19A uploaded too. I will post changelist tomorrow. Linux build expected tomorrow, sent to compilation. Link to comment Share on other sites More sharing options...
Member zebrap Posted May 9, 2011 Member Report Share Posted May 9, 2011 Thanks for this release Andrew ! I'm on Mac, using the V35-19A. and I'm back with the specular issue : ) Painting with a specular of zero will not affect the specularity on the layers beneath. This would be very useful to paint the Dirt layer on a model. but I can't get it to work. Usually I have this type of layering for my models. Very useful for optimal changes and variations: 5 Dirt 4 Scratches / rust 3 Stickers 2 Main Paint 1 Bare Metal At the moment I have to do some intricate work around with masks and frozen areas. I'm sure you must have loads of work on your plate, it would be so amazingly great to have that sorted ! : ) Anyway, it's still a pleasure to paint the models of our game with 3D-COAT. Thanks for the hard work ! Link to comment Share on other sites More sharing options...
Advanced Member LorenzoS Posted May 9, 2011 Advanced Member Report Share Posted May 9, 2011 (edited) Hi Andrew. The 'Build' tool in the voxel room is not working. Can any other Mac user confirm this. Sorry. Reinstalled. All better. Edited May 9, 2011 by LorenzoS Link to comment Share on other sites More sharing options...
Andrew Shpagin Posted May 10, 2011 Author Report Share Posted May 10, 2011 The list of changes in 3.5.19A: - symmety issues of pose tool and other reported issues solved - correct undo in new stamp mode - smooth all pose selection button Link to comment Share on other sites More sharing options...
Member Oleeblood Posted May 10, 2011 Member Report Share Posted May 10, 2011 Hi ! I want to use 3d-coat on linux, but CUDA version doesn't work... (voxel room is empty after merge objects) LWO export/import doesn't work... There is on Ubuntu 10.10, 11.04 too. CUDA toolkit verison 3.2. NVidia 260.41.06. What's wrong ? Can anybody help me ? Thanks, Oleeblood Link to comment Share on other sites More sharing options...
Andrew Shpagin Posted May 10, 2011 Author Report Share Posted May 10, 2011 Hi ! I want to use 3d-coat on linux, but CUDA version doesn't work... (voxel room is empty after merge objects) LWO export/import doesn't work... There is on Ubuntu 10.10, 11.04 too. CUDA toolkit verison 3.2. NVidia 260.41.06. What's wrong ? Can anybody help me ? Thanks, Oleeblood Please write to support.linux@3d-coat.com - Sergyi will definitely help. Link to comment Share on other sites More sharing options...
Advanced Member Frankie Posted May 10, 2011 Advanced Member Report Share Posted May 10, 2011 V3.5.19A CUDA DX64 & GL64 Win7 x64 Pen pressure not working at all. Works fine in photoshop. Intuos tablet. Latest drivers. Strange thing is I reverted back to an older version of 3dcoat to try and the pressure was no longer working either. Again, no problem in photoshop, so could it be that 3dcoat doesn't recognise the newer drivers? Or some preferences issues. It's been a couple month since I used 3dcoat so I'm not sure if things changed on either sides but I did not change anything on my part. Any help welcome. Link to comment Share on other sites More sharing options...
Advanced Member JimB Posted May 10, 2011 Advanced Member Report Share Posted May 10, 2011 I use Win7 x64 and the pen pressure works fine. Wacom Bamboo Fun Pen & Touch Small (CTH-461) Link to comment Share on other sites More sharing options...
Advanced Member polyxo Posted May 10, 2011 Advanced Member Report Share Posted May 10, 2011 Andrew in 19A on 64 Bit Cuda: Invert Freeze in Surface lets Objects disappear. Link to comment Share on other sites More sharing options...
Advanced Member polyxo Posted May 10, 2011 Advanced Member Report Share Posted May 10, 2011 Andrew - in 19A on 64 Bit Cuda: Bake Voxel-Object to Ptex forgets to Smooth additional Subdivisions. The Object which ends up in the Paint Room looks like a coarse LowPolyMesh. Link to comment Share on other sites More sharing options...
Advanced Member polyxo Posted May 10, 2011 Advanced Member Report Share Posted May 10, 2011 Andrew - in 19A on 64 Bit Cuda: The Link to Photoshop (all Options) seems broken. I have reassigned the Path in Preferences - all correct. When sending over stuff a Popup appears and asks for an an additional Path. See attached Link to comment Share on other sites More sharing options...
Member Oleeblood Posted May 10, 2011 Member Report Share Posted May 10, 2011 Please write to support.linux@3d-coat.com - Sergyi will definitely help. Ok, thank you. Link to comment Share on other sites More sharing options...
Andrew Shpagin Posted May 11, 2011 Author Report Share Posted May 11, 2011 Andrew in 19A on 64 Bit Cuda: Invert Freeze in Surface lets Objects disappear. I tried to reproduce - no luck. Is it in freeze tool with CTRL SHIFT I in surface voxel mode? Link to comment Share on other sites More sharing options...
Andrew Shpagin Posted May 11, 2011 Author Report Share Posted May 11, 2011 Andrew - in 19A on 64 Bit Cuda: Bake Voxel-Object to Ptex forgets to Smooth additional Subdivisions. The Object which ends up in the Paint Room looks like a coarse LowPolyMesh. It works as expected there. Probably there was some non-smooth edges. Try to use Auto smoothing in import dialog. Link to comment Share on other sites More sharing options...
Andrew Shpagin Posted May 11, 2011 Author Report Share Posted May 11, 2011 Andrew - in 19A on 64 Bit Cuda: The Link to Photoshop (all Options) seems broken. I have reassigned the Path in Preferences - all correct. When sending over stuff a Popup appears and asks for an an additional Path. See attached Does the path to PS contains German letters? Try to select path from Edit->preferences->Ext editor Link to comment Share on other sites More sharing options...
Member Phizter Posted May 11, 2011 Member Report Share Posted May 11, 2011 Pen pressure not working at all. Works fine in photoshop. Intuos tablet. Latest drivers. Pen pressure works fine here. V3.5-19A-(CUDA)(DX64)- Win 7 64 Bit - CINTIQ 21 I had problems with my Wacom drivers resetting my preferences after reboot or not starting up at all. So I contacted Wacom support. Here is what the told me to do: The first thing we need is for you to complete a full reinstall as an Admin user. Please follow the directions below: Unplug the tablet from the computer. Uninstall the driver from the PROGRAMS AND FEATURES (respectively ADD OR REMOVE PROGRAMS) section of the Control Panel Reboot your system Remove any remaining Wacom entries from device manager Remove the following files from your system: tablet.dat and pen_tablet.dat from all over the hard disk (search as administrator) wintab*.* from WINDOWS\SYSTEM32 (and on XP64 in SYSWOW64) Reboot your system Your tablet driver is now completely removed from the system. To install the tablet again, plug in the tablet again and install the latest driver for your tablet (from http://www.wacom.eu/index2.asp?lang=en&pid=29&gm=3). After the reinstall, please check if A. the driver starts all the time B. the preferences are stored / used after each restart I followed the instructions and the problems mentioned above are now gone. -Martin Link to comment Share on other sites More sharing options...
Advanced Member polyxo Posted May 11, 2011 Advanced Member Report Share Posted May 11, 2011 I tried to reproduce - no luck. Is it in freeze tool with CTRL SHIFT I in surface voxel mode? Yes it is. Objects always disappear also with the default Shader. I just tried on 32Bit XP Cuda - here Inversion works. Link to comment Share on other sites More sharing options...
Advanced Member polyxo Posted May 11, 2011 Advanced Member Report Share Posted May 11, 2011 Does the path to PS contains German letters? Try to select path from Edit->preferences->Ext editor My path does not contain Umlauts (ä, ö, ü ...) but the OS is German, yes. This mistake happens both on Cuda 64 Win7 as also on Cuda XP32. I have reassigned the Path to Photoshop on both Systems - that doesn't help. Photoshop opens but it doesn't open the Temp-File (the 3DCoat-Settings folder is in its default position). Bringing Stuff to Photoshop and back was no problem in previous versions - something must have changed. Link to comment Share on other sites More sharing options...
Advanced Member polyxo Posted May 11, 2011 Advanced Member Report Share Posted May 11, 2011 polyxo, on 10 May 2011 - 06:24 PM, said: Andrew - in 19A on 64 Bit Cuda:Bake Voxel-Object to Ptex forgets to Smooth additional Subdivisions. The Object which ends up in the Paint Room looks like a coarse LowPolyMesh. Forum Feedback: Multiquote does not work with Firefox 4 here. It does nothing! I added the second quotation manually. It works as expected there. Probably there was some non-smooth edges. Try to use Auto smoothing in import dialog. No Andrew - it happens not with imported stuff but with stuff created in the Voxel-Room. Actually this is already an old bug. I have seen it in many versions of 3DC before - but in the recent versions I had no problems with Ptex. What happens is that the Retopo-Mesh gets subdivided but without the typical Catmull Clark Smoothing. It stays a hard edged model but has dense Subdivision. Hmmm... I just wanted to create a Video-Clip to demonstrate you and now I see it working correctly for the first time. That is really odd. Yesterday and today I only used default Entries and did not paint Density or Curves... Link to comment Share on other sites More sharing options...
Andrew Shpagin Posted May 11, 2011 Author Report Share Posted May 11, 2011 Linux build 3.5.19A uploaded. Link to comment Share on other sites More sharing options...
Advanced Member jamie Posted May 11, 2011 Advanced Member Report Share Posted May 11, 2011 Linux build 3.5.19A uploaded. awesome! can't wait to try it out. Link to comment Share on other sites More sharing options...
Andrew Shpagin Posted May 11, 2011 Author Report Share Posted May 11, 2011 My path does not contain Umlauts (ä, ö, ü ...) but the OS is German, yes. This mistake happens both on Cuda 64 Win7 as also on Cuda XP32. I have reassigned the Path to Photoshop on both Systems - that doesn't help. Photoshop opens but it doesn't open the Temp-File (the 3DCoat-Settings folder is in its default position). Bringing Stuff to Photoshop and back was no problem in previous versions - something must have changed. Please check if file ...\Documents\3D-CoatV3\Temp\LayersZ.psd exists and is correct. Link to comment Share on other sites More sharing options...
Recommended Posts